CBT3125PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | Bus Switch |
| Resistance | 10Ohm |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBT3125 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Circuit | 1 x 1:1 |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 5.4 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5.4 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
CBT3125PW,112 Overview
This is a relatively small item of digital switch that is included in the 14-TSSOP (0.173, 4.40mm Width) in order to save space on the board.As a result, it is packaged in a way that is referred to as Tube.In terms of mounting, digital switch ic uses the method of Surface Mount.the multiplexers uses an analog IC Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.Since they are members of the 74CBT series, they can be used in a wide variety of applications.As part of its basic configuration, 14 terminations are designed as a part of it.In addition, it also has a base part number of 74CBT3125, which can be used to find related parts.The multiplexer's system is powered by 5V voltage.This turn signal switch contains 14 component pins.A conductor terminates at GULL WING.As a type of supply, Single is employed.The board is configured with 14 pins.The multiplexer ic is mounted in the direction of Surface Mount.In the CBT/FST/QS/5C/B family, the logic switch is included.In this signal multiplexer, there are 1 bits provided.Without the influence of external factors, it consumes 3μA current of multiplexer ic.Supply voltages of 5V can provide reliable performance of the multiplexers.2 is the resistance at which it operates.The system operates with a resistance of 10Ohm.A configuration element for the mux switch consists of 4 elements.
CBT3125PW,112 Features
Supplied in the 14-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
CBT3125PW,112 Applications
There are a lot of Nexperia USA Inc. CBT3125PW,112 Signal Switches / Multiplexers / Decoders applications.
- Used to connect a single source to multiple destinations
- Control unit of Central Processing unit (CPU)
- Data communication
- CPU memory location identification
- Seven segment displays
- Code converters
- Electronic circuits
- Speed synchronization of multiple motors in industries
- Enabling block of memory depending on address in memory chips
- Communication system
