banner_page

CBT3244ADB,112

20 Terminations4.5V~5.5V 20 Pin 74CBT3244 Signal switch74CBT Series 2 Functions


  • Manufacturer: Nexperia USA Inc.
  • Nocochips NO: 554-CBT3244ADB,112
  • Package: 20-SSOP (0.209, 5.30mm Width)
  • Datasheet: PDF
  • Stock: 968
  • Description: 20 Terminations4.5V~5.5V 20 Pin 74CBT3244 Signal switch74CBT Series 2 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SSOP (0.209, 5.30mm Width)
Number of Pins 20
Operating Temperature -40°C~85°C
Packaging Tube
Published 2005
Series 74CBT
JESD-609 Code e4
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Type Bus Switch
Resistance 8Ohm
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number 74CBT3244
Pin Count 20
Operating Supply Voltage 5V
Circuit 4 x 1:1
Number of Ports 2
Nominal Supply Current 1μA
Number of Bits 8
Propagation Delay 250 ps
Quiescent Current 3μA
Turn On Delay Time 6 ns
Family CBT/FST/QS/5C/B
Output Characteristics 3-STATE
Supply Type Single
Output Polarity TRUE
Low Level Output Current 128mA
Voltage Supply Source Single Supply
Independent Circuits 2
Width 5.3mm
Radiation Hardening No
RoHS Status RoHS Compliant

CBT3244ADB,112 Overview


Providing this information in the 20-SSOP (0.209, 5.30mm Width) enables digital switch board space to be saved.Tube is the packaging method.In terms of mounting, digital switch ic uses the Surface Mount method .the multiplexers uses an analog IC Bus Switch.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility using digital controlled switch when it works with 4.5V~5.5V voltage.In addition to being a member of the 74CBT series, these multiplexers have a wide range of applications.The basic configuration of this system includes 20 terminations.As its base part number is 74CBT3244, logic switch can also be used to find its related parts.The voltage supplied for multiplexer's system is 5V.multiplexer's systemIn this turn signal switch, there are 20 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.There is a type of supply Single that is employed in this case.A configuration of 20 pins is used.The multiplexer ic is mounted in the direction of Surface Mount.Among the family of CBT/FST/QS/5C/B the logic switch is a member.Signal multiplexer contains 8 bits.Without external influences, it consumes 3μA current of multiplexer ic.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.The signal switching operates with a resistance of 2.8Ohm is the resistance at which it operates.

CBT3244ADB,112 Features


Supplied in the 20-SSOP (0.209, 5.30mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V

CBT3244ADB,112 Applications


There are a lot of Nexperia USA Inc. CBT3244ADB,112 Signal Switches / Multiplexers / Decoders applications.

  • VGA
  • Analog to digital conversion
  • Telephone network
  • Data bus control
  • Logic circuits
  • Enabling different rows of memory depending on address in memory chips
  • Automatic health monitoring systems
  • High-performance memory systems
  • Combinational circuit
  • Data distribution

Write a review

Note: HTML is not translated!
    Bad           Good