CBT3245ABQ-Q100X
| Parameters | |
|---|---|
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 4.5mm |
| Width | 2.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74CBT |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | Bus Switch |
| Resistance | 10Ohm |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74CBT3245 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Circuit | 8 x 1:1 |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 6 ns |
| Quiescent Current | 1μA |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
CBT3245ABQ-Q100X Overview
Due to the lack of space on the board, digital switch is provided in the 20-VFQFN Exposed Pad.Tape & Reel (TR) is the packaging method.In terms of mounting, digital switch ic uses the Surface Mount method .The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.With a supply voltage of 4V~5.5V, designers have greater flexibility of digital controlled switch.These multiplexers are members of the 74CBT series, which provide extensive application potential.As parts of its basic configuration, 20 terminations are desgined.The base part number is 74CBT3245, which can also be used to find its logic switch related parts.The multiplexer's system is powered by 5V volts.In this turn signal switch, there are 20 component pins.As a type of supply, Single is employed.There are 20 pins on it.Multiplexer ics are mounted in the direction of Surface Mount.Among the family of CBT/FST/QS/5C/B the logic switch is a member.Signal multiplexer contains 8 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 4V so that unnecessary failures can be prevented.Not being affected by the external factors, consumes 1μA current of multiplexer ic.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.The resistance of the signal switching is 2.The system operates with a resistance of 10Ohm.
CBT3245ABQ-Q100X Features
Supplied in the 20-VFQFN Exposed Pad package
Adopting a supply type of Single
Operating with the supply voltage of 5V
CBT3245ABQ-Q100X Applications
There are a lot of Nexperia USA Inc. CBT3245ABQ-Q100X Signal Switches / Multiplexers / Decoders applications.
- D/A converters
- Used to connect a single source to multiple destinations
- Electronic circuits
- Paper plants
- A/D converters
- Arithmetic Logic Units
- Logic gates for other digital devices
- Small scale TV wall
- Data bus control
- Microprocessor instruction decoding
