CBT3245ABQ,118
| Parameters | |
|---|---|
| Base Part Number | 74CBT3245 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Circuit | 8 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 4.5mm |
| Width | 2.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2017 |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | Bus Switch |
| Resistance | 10Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 8 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
CBT3245ABQ,118 Overview
Due to the lack of space on the board, digital switch is provided in the 20-VFQFN Exposed Pad.It is packaged in the way of Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .In the multiplexers, the analog IC Bus Switch is used.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4V~5.5V.provides digital controlled switch's digital controlled switch'sMultiplexers in the 74CBT series are suitable for a wide range of applications.The basic configuration of this system includes 20 terminations.The base part number is 74CBT3245, so you can find its logic switch related parts using that number.The multiplexer's system is supplied with a voltage of 5V.This turn signal switch has 20 component pins.This supply type employs Single.The board has 20 pins configured.The mounting point is Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.As a result, signal multiplexer provides a total of 8 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 4V to avoid some unnecessary failures.The power supply of 5V is provided for mux switch's normal operation.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.It consumes 3μA current of multiplexer ic without external influences.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.A resistance of 2 governs its operation.A resistance of 10Ohm is used to operate the signal switching.
CBT3245ABQ,118 Features
Supplied in the 20-VFQFN Exposed Pad package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
CBT3245ABQ,118 Applications
There are a lot of Nexperia USA Inc. CBT3245ABQ,118 Signal Switches / Multiplexers / Decoders applications.
- CNC machines
- Audio transmission
- Injectors
- To select different task for memory in microprocessor memory systems
- To select different devices in microprocessor input
- Data communication
- Combinational circuit
- PCIe
- Textile mills
- Time division multiplexing system
