CBT3245AD,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2017 |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | Bus Switch |
| Resistance | 10Ohm |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74CBT3245 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Circuit | 8 x 1:1 |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 6 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
CBT3245AD,112 Overview
This is a relatively small item of digital switch that is included in the 20-SOIC (0.295, 7.50mm Width) in order to save space on the board.It is packaged in the way of Tube.Mounting is performed using Surface Mount.The analog IC in the multiplexers is identified as Bus Switch.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4V~5.5V.provides digital controlled switch's digital controlled switch'sMultiplexers in the 74CBT series are suitable for a wide range of applications.As parts of its basic configuration, 20 terminations are desgined.You can also find related parts by using its logic switch base part number of 74CBT3245.The voltage supplied for multiplexer's system is 5V.multiplexer's systemIn this turn signal switch, there are 20 components that can be connected to each pin.It is the end of conductors that is represented by GULL WING.In this case, Single is employed as the supply type.This multiplexer ic is configured with 20 pins.It is mounted in the way of Surface Mount.The logic switch is included into the family of CBT/FST/QS/5C/B.Signal multiplexer contains 8 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 4V so that unnecessary failures can be prevented.In the absence of external influences, it consumes 3μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.As far as the resistance is concerned, it operates with 2.With a resistance of 10Ohm, it operates.
CBT3245AD,112 Features
Supplied in the 20-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
CBT3245AD,112 Applications
There are a lot of Nexperia USA Inc. CBT3245AD,112 Signal Switches / Multiplexers / Decoders applications.
- Enabling different rows of memory depending on address in memory chips
- Automation system
- Used to connect a single source to multiple destinations
- Textile mills
- Recording transmission
- D/A converters
- Microprocessor input/output systems
- Analog, digital or video signal switching
- War field flying robot with a night vision flying camera
- Idle motor
