CBT3245ADB,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | Bus Switch |
| Resistance | 10Ohm |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74CBT3245 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Circuit | 8 x 1:1 |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 6 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
CBT3245ADB,112 Overview
It is included in the 20-SSOP (0.209, 5.30mm Width) in order to save board space.Tube is the method used for packaging.As far as mounting is concerned, digital switch ic uses Surface Mount.In the multiplexers, the analog IC Bus Switch is used.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.When digital controlled switch operates at 4V~5.5V, designers are provided with a greater degree of flexibility.Multiplexers from the 74CBT series can be used in a wide range of applications.As part of its basic configuration, 20 terminations are designed as a part of it.Its logic switch base part number is 74CBT3245 which can also be used to find its logic switch related parts.In this case, 5V is the voltage supplied to the multiplexer's system.This turn signal switch consists of 20 component pins.It is the end of conductors that is represented by GULL WING.In this case, Single is employed as the supply type.There are 20 pins on it.The mounting point is Surface Mount.There is a family of CBT/FST/QS/5C/B members.In this signal multiplexer, there are 8 bits that are provided.It is recommended that the minimum supply voltage (Vsup) be kept at 4V to avoid some unnecessary failures.In the absence of external influences, it consumes 3μA current of multiplexer ic.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.As far as the resistance is concerned, it operates with 2.With a resistance of 10Ohm, it operates.
CBT3245ADB,112 Features
Supplied in the 20-SSOP (0.209, 5.30mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
CBT3245ADB,112 Applications
There are a lot of Nexperia USA Inc. CBT3245ADB,112 Signal Switches / Multiplexers / Decoders applications.
- Speed control of medern motors
- Make full adder
- Memory chips
- Telephone network
- To select different devices in microprocessor input
- VGA
- Medical industry
- Night vision cameras
- Enabling different rows of memory depending on address in memory chips
- Microprocessor memory systems
