CBT3245APW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | Bus Switch |
| Resistance | 10Ohm |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74CBT3245 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8 x 1:1 |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Output Current | 128mA |
| Number of Bits | 8 |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CBT3245APW,118 Overview
In order to conserve board space, digital switch is included in the 20-TSSOP (0.173, 4.40mm Width).Tape & Reel (TR) represents its packaging.Digital switch ic adheres to a mounting method of Surface Mount.Bus Switch is the analog IC that the multiplexers uses.The operating temperature of -40°C~85°C will not be susceptible to external factors.With a supply voltage of 4V~5.5V, designers have greater flexibility of digital controlled switch.Since they are members of the 74CBT series, they can be used in a wide variety of applications.As part of its basic configuration, 20 terminations are designed as a part of it.In addition, it also has a base part number of 74CBT3245, which can be used to find related parts.The multiplexer's system is powered by 5V voltage.A component pin count of 20 is found on this turn signal switch.Conductors terminate at GULL WING in this design.As a type of supply, Single is employed.The board has 20 pins configured.Multiplexer ics are mounted in the direction of Surface Mount.The CBT/FST/QS/5C/B family includes the logic switch.The multiplexer ic provides 8 bits.Keep Vsup at 4V to avoid unnecessary failures.No external influence consumes 3μA current of multiplexer ic.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.The signal switching operates with a resistance of 2.This signal switching operates at a resistance of 10Ohm.The mux switch configuration contains 1 elements.The output current of 128mA is provided for higher switches' flexibility.
CBT3245APW,118 Features
Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
CBT3245APW,118 Applications
There are a lot of Nexperia USA Inc. CBT3245APW,118 Signal Switches / Multiplexers / Decoders applications.
- Data-routing applications
- Make full adder
- Night vision cameras
- Analog, digital or video signal switching
- Microprocessor memory systems
- Telephone network
- LVDS
- Memory system of computers
- Logic gates for other digital devices
- Code conversion
