CBT3306D,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Bus Switch |
| Resistance | 6.8Ohm |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74CBT3306 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 1:1 |
| Number of Channels | 2 |
| Number of Ports | 2 |
| Output Current | 128mA |
| Number of Bits | 1 |
| Propagation Delay | 5 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
CBT3306D,118 Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 8-SOIC (0.154, 3.90mm Width).Tape & Reel (TR) is the packaging method.The method digital switch ic adopts for mounting is Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sThe multiplexers from 74CBT series can be used for a wide range of applications.There is a design for terminating 8 as part of its basic configuration.In addition, it also has a base part number of 74CBT3306, which can be used to find related parts.The multiplexer's system is supplied with a voltage of 5V.Signal switch has 8 component pins.A conductor terminates at GULL WING.The supply type of this multiplexer ic is Single.A total of 8 pins are configured on this board.Surface Mount is the way it is mounted.In the CBT/FST/QS/5C/B family, the logic switch is included.There are 1 bits in signal multiplexer.It consumes 3μA current of multiplexer ic without external influences.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.The signal switching operates with a resistance of 2.A resistance of 6.8Ohm is used to operate it.This turn signal switch's circuit is based on a circuit with 2 channels.It is possible to provide a current output of 128mA for greater switches' flexibility.
CBT3306D,118 Features
Supplied in the 8-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
CBT3306D,118 Applications
There are a lot of Nexperia USA Inc. CBT3306D,118 Signal Switches / Multiplexers / Decoders applications.
- War field flying robot with a night vision flying camera
- Code converters
- Code conversion
- Data demultiplexing
- Time division multiplexing system
- Speed control of medern motors
- Steel plants
- Implementing boolean functions with multiple variables
- Medical industry
- Enabling block of memory depending on address in memory chips
