CBTD16210DGG,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| Series | 74CBTD |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | Bus Switch |
| Resistance | 16Ohm |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74CBTD16210 |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Circuit | 10 x 1:1 |
| Number of Ports | 2 |
| Number of Bits | 20 |
| Propagation Delay | 9 ns |
| Quiescent Current | 1.5mA |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Width | 6.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
CBTD16210DGG,112 Overview
As a means of saving space, digital switch is provided in the 48-TFSOP (0.240, 6.10mm Width).The package is packaged in accordance with Tube.digital switch ic uses the method of Surface Mount for mounting.The analog IC used in the multiplexers can be referred to as Bus Switch.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.In addition to being a member of the 74CBTD series, these multiplexers have a wide range of applications.Its basic configuration includes terminations in the 48 range.The part number for 74CBTD16210 can be used to find its logic switch related parts as well.The voltage supplied for multiplexer's system is 5V.multiplexer's systemCurrently, this turn signal switch has a total of 48 component pins.It employs GULL WING as the point at which conductors come to an end.There is a supply type of Single employed as part of this supply.A configuration of 48 pins is used.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is included into the family of CBT/FST/QS/5C/B.As a result, signal multiplexer provides 20 bits.In the absence of external influences, it consumes 1.5mA current of multiplexer ic.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.2 ports are used for some other peripheral signal switchings to plug in.It operates with a resistance of 16Ohm.
CBTD16210DGG,112 Features
Supplied in the 48-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
CBTD16210DGG,112 Applications
There are a lot of Nexperia USA Inc. CBTD16210DGG,112 Signal Switches / Multiplexers / Decoders applications.
- HDMI applications
- Decimal decoder
- Logic gates for other digital devices
- Paper plants
- Encrypted communications system
- Textile mills
- D/A converters
- Communication system
- PCIe
- Video transmission
