CBTD16210DGG,518
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Supplier Device Package | 48-TSSOP |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74CBTD |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Bus Switch |
| Resistance | 16Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74CBTD16210 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 10 x 1:1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 20 |
| Propagation Delay | 250 ps |
| Quiescent Current | 1.5mA |
| Turn On Delay Time | 9 ns |
| Supply Type | Single |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
CBTD16210DGG,518 Overview
For the purpose of saving board space, digital switch is included in the 48-TFSOP (0.240, 6.10mm Width).The package is in the form of Tape & Reel (TR).Surface Mount is the mounting method digital switch ic uses.In the multiplexers, the analog IC Bus Switch is used.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.The multiplexers can be used for a wide range of applications since they are members of 74CBTD series.As its base part number is 74CBTD16210, logic switch can also be used to find its related parts.Single is used as its supply type.This multiplexer ic has 48 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.The multiplexer ic provides 20 bits.Not being affected by the external factors, consumes 1.5mA current of multiplexer ic.Supply voltages of 5V can provide reliable performance of the multiplexers.A resistance of 16Ohm is used to operate it.Signal switch operation at 85°C temperature is acceptable.It is recommended that the minimal operating temperature of the multiplexer be maintained at -40°C.In compliance with the applicable device specification, the signal switches has a maximum supply voltage of 5.5V.A minimum supply voltage of 4.5V is required to operate the digital swith.It contains 2 elements in mux switch configuration.
CBTD16210DGG,518 Features
Supplied in the 48-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
CBTD16210DGG,518 Applications
There are a lot of Nexperia USA Inc. CBTD16210DGG,518 Signal Switches / Multiplexers / Decoders applications.
- Paper plants
- GLAN
- Injectors
- Medium scale TV wall
- A robotic vehicle with the metal detector
- Electronics industry
- Video transmission
- Memory chips
- Data demultiplexing
- Speed control of medern motors
