banner_page

CBTD16211DL,518

56 Terminations4.5V~5.5V 56 Pin 74CBTD16211 Signal switch74CBTD Series 2 Functions


  • Manufacturer: Nexperia USA Inc.
  • Nocochips NO: 554-CBTD16211DL,518
  • Package: 56-BSSOP (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 723
  • Description: 56 Terminations4.5V~5.5V 56 Pin 74CBTD16211 Signal switch74CBTD Series 2 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 56-BSSOP (0.295, 7.50mm Width)
Number of Pins 56
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Published 2017
Series 74CBTD
JESD-609 Code e4
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 56
Type Bus Switch
Resistance 35Ohm
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.635mm
Base Part Number 74CBTD16211
Pin Count 56
Operating Supply Voltage 5V
Circuit 12 x 1:1
Number of Ports 2
Number of Bits 24
Propagation Delay 250 ps
Quiescent Current 1.5mA
Turn On Delay Time 8.5 ns
Family CBT/FST/QS/5C/B
Output Characteristics 3-STATE WITH SERIES RESISTOR
Supply Type Single
Output Polarity TRUE
High Level Output Current 64mA
Low Level Output Current 128mA
Voltage Supply Source Single Supply
Independent Circuits 2
Width 7.5mm
Radiation Hardening No
RoHS Status RoHS Compliant

CBTD16211DL,518 Overview


In order to conserve board space, digital switch is included in the 56-BSSOP (0.295, 7.50mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.In the multiplexers, the analog IC is indicated by Bus Switch.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sThe multiplexers can be used for a wide range of applications since they are members of 74CBTD series.This configuration includes 56 terminations as part of its basic functionality.There is a base part number of 74CBTD16211 which can also be used in order to locate the logic switch that are related to this item.In this case, 5V is the voltage supplied to the multiplexer's system.This turn signal switch consists of 56 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Single is employed as its supply type.This multiplexer ic has 56 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.Among the family of CBT/FST/QS/5C/B the logic switch is a member.There are 24 bits signal multiplexer provides.Despite not interacting with external factors, it consumes 1.5mA current of multiplexer ic.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.The resistance of the signal switching is 2.This signal switching operates at a resistance of 35Ohm.

CBTD16211DL,518 Features


Supplied in the 56-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V

CBTD16211DL,518 Applications


There are a lot of Nexperia USA Inc. CBTD16211DL,518 Signal Switches / Multiplexers / Decoders applications.

  • VGA
  • Microprocessor input/output systems
  • To select different devices in microprocessor input
  • Logic gates for other digital devices
  • Data transfer
  • Code converters
  • Transmission from the computer system of a satellite
  • Communication system
  • Video transmission
  • A/D converters

Write a review

Note: HTML is not translated!
    Bad           Good