CBTD16213DGG,112
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| Series | 74CBTD |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | Bus FET Exchange Switch |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74CBTD16213 |
| Pin Count | 56 |
| JESD-30 Code | R-PDSO-G56 |
| Qualification Status | Not Qualified |
| Circuit | 12 x 2:2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 4 |
| Number of Bits | 12 |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Propagation Delay (tpd) | 0.25 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| RoHS Status | ROHS3 Compliant |
CBTD16213DGG,112 Overview
In order to conserve board space, digital switch is included in the 56-TFSOP (0.240, 6.10mm Width).The package is in the form of Tube.The mounting method digital switch ic uses is Surface Mount.As the analog part, the circuit uses an analog IC Bus FET Exchange Switch.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.Multiplexers of the 74CBTD series can be used in a wide range of applications.The basic configuration includes 56 terminations.The base part number is 74CBTD16213, so you can find its logic switch related parts using that number.In multiplexer's system, 5V is the voltage supplied.Currently, this turn signal switch has a total of 56 component pins.GULL WING represents the end of conductors.Among the family of CBT/FST/QS/5C/B the logic switch is a member.As a result, signal multiplexer provides a total of 12 bits.Keep Vsup at 4.5V to avoid unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V in order to prevent some unnecessary failures.During mux switch's normal operation, 5V is provided with a power supply.Part number Other Logic ICs indicates that the digital switch ic is an electronic part.With a resistance of 0, it operates.
CBTD16213DGG,112 Features
Supplied in the 56-TFSOP (0.240, 6.10mm Width) package
Power supplies of 5V
CBTD16213DGG,112 Applications
There are a lot of NXP USA Inc. CBTD16213DGG,112 Signal Switches / Multiplexers / Decoders applications.
- Microprocessor input/output systems
- Robotic vehicles
- Memory chips
- Telephone network
- Textile mills
- HDMI applications
- Arithmetic Logic Units
- Implementing boolean functions with multiple variables
- Speed control of medern motors
- To select different task for memory in microprocessor memory systems
