banner_page

CBTD16213DL,512

56 Terminations4.5V~5.5V 74CBTD16213 Signal switch74CBTD Series 2 Functions


  • Manufacturer: NXP USA Inc.
  • Nocochips NO: 568-CBTD16213DL,512
  • Package: 56-BSSOP (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 127
  • Description: 56 Terminations4.5V~5.5V 74CBTD16213 Signal switch74CBTD Series 2 Functions(Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 56-BSSOP (0.295, 7.50mm Width)
Surface Mount YES
Operating Temperature -40°C~85°C
Packaging Tube
Published 2009
Series 74CBTD
JESD-609 Code e4
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 56
Type Bus FET Exchange Switch
Terminal Finish NICKEL PALLADIUM GOLD
Subcategory Other Logic ICs
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 245
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.635mm
Reach Compliance Code unknown
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number 74CBTD16213
Pin Count 56
JESD-30 Code R-PDSO-G56
Qualification Status Not Qualified
Circuit 12 x 2:2
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 5V
Supply Voltage-Min (Vsup) 4.5V
Number of Ports 4
Number of Bits 12
Family CBT/FST/QS/5C/B
Output Characteristics 3-STATE
Output Polarity TRUE
Propagation Delay (tpd) 0.25 ns
Voltage Supply Source Single Supply
Independent Circuits 1
Height Seated (Max) 2.8mm
Width 7.5mm
RoHS Status ROHS3 Compliant

CBTD16213DL,512 Overview


Due to the fact that it is provided in the 56-BSSOP (0.295, 7.50mm Width), digital switch allows the board to be compacted.In this case, it is packaged as Tube.Digital switch ic uses a Surface Mount mounting method.the multiplexers uses an analog IC Bus FET Exchange Switch.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.With the 74CBTD series, the multiplexers are suitable for a diverse range of applications.The basic configuration of this system includes 56 terminations.Its logic switch base part number is 74CBTD16213 which can also be used to find its logic switch related parts.For multiplexer's system, 5V voltage is supplied.A component pin count of 56 can be found on this turn signal switch.GULL WING represents the end of conductors.The logic switch is a member of the CBT/FST/QS/5C/B family.Signal multiplexer contains 12 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 4.5V to avoid some unnecessary failures.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.In order to maintain mux switch's normal operation, power is provided to 5V.In electronic terms, the digital switch ic is classified as Other Logic ICs.The resistance is 4.

CBTD16213DL,512 Features


Supplied in the 56-BSSOP (0.295, 7.50mm Width) package
Power supplies of 5V

CBTD16213DL,512 Applications


There are a lot of NXP USA Inc. CBTD16213DL,512 Signal Switches / Multiplexers / Decoders applications.

  • LVDS
  • Logic gates for other digital devices
  • Small scale TV wall
  • Recording transmission
  • Night vision cameras
  • Automatic Monitoring systems
  • VGA
  • Relay
  • Arithmetic Logic Units
  • Data transfer

Write a review

Note: HTML is not translated!
    Bad           Good