CBTD3384D,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| Series | 74CBTD |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | Bus Switch |
| Resistance | 17Ohm |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74CBTD3384 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Circuit | 5 x 1:1 |
| Number of Ports | 2 |
| Number of Bits | 10 |
| Propagation Delay | 250 ps |
| Quiescent Current | 1.5mA |
| Turn On Delay Time | 7 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Length | 15.4mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
CBTD3384D,112 Overview
This is a relatively small item of digital switch that is included in the 24-SOIC (0.295, 7.50mm Width) in order to save space on the board.The package is in the form of Tube.digital switch ic uses the method of Surface Mount for mounting.A digital IC Bus Switch is used as the analog component of the multiplexers.The operating temperature of -40°C~85°C will not be susceptible to external factors.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.Multiplexers in the 74CBTD series are suitable for a wide range of applications.This configuration includes 24 terminations as part of its basic functionality.The base part number is 74CBTD3384, so you can find its logic switch related parts using that number.In multiplexer's system, 5V is the voltage supplied.This turn signal switch has 24 component pins.It employs GULL WING as the point at which conductors come to an end.In this case, the supply type is Single.Currently, it is configured with 24 pins.As you can see, it is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.The multiplexer ic provides 10 bits.Without the influence of external factors, it consumes 1.5mA current of multiplexer ic.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.As far as the resistance is concerned, it operates with 2.A resistance of 17Ohm is used to operate it.
CBTD3384D,112 Features
Supplied in the 24-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
CBTD3384D,112 Applications
There are a lot of Nexperia USA Inc. CBTD3384D,112 Signal Switches / Multiplexers / Decoders applications.
- Idle motor
- Automation system
- Control unit of Central Processing unit (CPU)
- Memory chips
- Data transfer
- GLAN
- Metal detectors
- RF-based home automation system
- Data collection system
- Enabling block of memory depending on address in memory chips
