Parameters |
Mounting Type |
Surface Mount |
Package / Case |
24-SSOP (0.154, 3.90mm Width) |
Surface Mount |
YES |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2010 |
Series |
74CBTD |
JESD-609 Code |
e4 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
Type |
Bus Switch |
Terminal Finish |
NICKEL PALLADIUM GOLD |
Subcategory |
Bus Driver/Transceivers |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.635mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
74CBTD3384 |
Pin Count |
24 |
Qualification Status |
Not Qualified |
Circuit |
5 x 1:1 |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4.5V |
Number of Ports |
2 |
Number of Bits |
10 |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Output Polarity |
TRUE |
Voltage Supply Source |
Single Supply |
Independent Circuits |
2 |
Height Seated (Max) |
1.73mm |
Length |
8.7mm |
Width |
3.9mm |
RoHS Status |
ROHS3 Compliant |
CBTD3384DK,118 Overview
As a means of saving space, digital switch is provided in the 24-SSOP (0.154, 3.90mm Width).In this case, it is packaged as Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.the multiplexers uses an analog IC Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.When digital controlled switch operates at 4.5V~5.5V, designers have superior flexibility.The multiplexers from 74CBTD series can be used for a wide range of applications.It is designed with 24 terminations as part of its basic configuration.The base part number is 74CBTD3384, which is also useful when looking up signal switch's related components.For multiplexer's system, 5V voltage is supplied.This turn signal switch contains 24 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.The logic switch belongs to the family of CBT/FST/QS/5C/B.There are 10 bits in signal multiplexer.Vsup should be kept at 4.5V to prevent some unnecessary failures.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.There is a power supply provided for the mux switch's normal operation of 5V.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.The resistance is 2.
CBTD3384DK,118 Features
Supplied in the 24-SSOP (0.154, 3.90mm Width) package
Power supplies of 5V
CBTD3384DK,118 Applications
There are a lot of NXP USA Inc. CBTD3384DK,118 Signal Switches / Multiplexers / Decoders applications.
- A robotic vehicle with the metal detector
- Enabling different functions units in microprocessor instruction decoding
- Data-routing applications
- Automatic health monitoring systems
- Enabling block of memory depending on address in memory chips
- Computer memory
- HD surveillance system
- Relay
- Frequency multiplexing system
- Idle motor