CBTD3384PW,112
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| Series | 74CBTD |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | Bus Switch |
| Resistance | 17Ohm |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBTD3384 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 5 x 1:1 |
| Number of Ports | 2 |
| Output Current | 128mA |
| Number of Bits | 10 |
| Propagation Delay | 7 ns |
| Quiescent Current | 1.5mA |
| Turn On Delay Time | 7 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 1.1mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
CBTD3384PW,112 Overview
Providing this information in the 24-TSSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.It is packaged according to the Tube method.Mounting is performed using Surface Mount.In the multiplexers, the analog IC Bus Switch is used.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.In addition to being a member of the 74CBTD series, these multiplexers have a wide range of applications.Among its basic features are 24 terminations.The base part number is 74CBTD3384, which is also useful when looking up signal switch's related components.The multiplexer's system is supplied with a voltage of 5V.In this turn signal switch, there are 24 components that can be connected to each pin.As a result, GULL WING represents the end of the conductors.Single is employed as its supply type.The board has 24 pins configured.Multiplexer ics are mounted in the direction of Surface Mount.Among the family of CBT/FST/QS/5C/B the logic switch is a member.In this signal multiplexer, there are 10 bits provided.In the absence of external influences, it consumes 1.5mA current of multiplexer ic.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.The resistance of the signal switching is 2.In terms of resistance, it has a value of 17Ohm.In the mux switch configuration, there are 2 elements.For higher switches' flexibility, the output current is set to 128mA.
CBTD3384PW,112 Features
Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
CBTD3384PW,112 Applications
There are a lot of Nexperia USA Inc. CBTD3384PW,112 Signal Switches / Multiplexers / Decoders applications.
- PCIe
- LVDS
- Make half adder
- Implementing boolean functions with multiple variables
- Data bus control
- Arithmetic Logic Units
- Robotic vehicles
- Code converters
- Injectors
- Transmission from the computer system of a satellite
