CBTD3861PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | Bus Switch |
| Resistance | 50Ohm |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74CBTD3861 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 10 x 1:1 |
| Number of Ports | 2 |
| Nominal Supply Current | 1.5mA |
| Output Current | 128mA |
| Number of Bits | 10 |
| Propagation Delay | 250 ps |
| Quiescent Current | 1.5mA |
| Turn On Delay Time | 10 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Length | 7.8mm |
| Width | 4.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
CBTD3861PW,118 Overview
In order to save board space, digital switch is located in the 24-TSSOP (0.173, 4.40mm Width).The package is packaged in accordance with Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.The analog IC in the multiplexers is identified as Bus Switch.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.When operated with a 4.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Among its basic configurations are 24 terminations.The base part number is 74CBTD3861, so you can find its logic switch related parts using that number.In multiplexer's system, 5V is the voltage supplied.This turn signal switch contains 24 component pins.GULL WING represents the end of conductors.Single is employed as its supply type.The board is configured with 24 pins.The multiplexer ic is mounted in the direction of Surface Mount.Among the family of CBT/FST/QS/5C/B the logic switch is a member.In this signal multiplexer, there are 10 bits provided.Despite not interacting with external factors, it consumes 1.5mA current of multiplexer ic.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.The system operates with a resistance of 2.50Ohm is the resistance at which it operates.In the mux switch configuration, there are 1 elements.There is an output current of 128mA that allows for greater switches' flexibility.
CBTD3861PW,118 Features
Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
CBTD3861PW,118 Applications
There are a lot of Nexperia USA Inc. CBTD3861PW,118 Signal Switches / Multiplexers / Decoders applications.
- Home automation system
- Implementing boolean functions with multiple variables
- Enabling block of memory depending on address in memory chips
- Used to connect a single source to multiple destinations
- Injectors
- Logic gates for other digital devices
- Frequency multiplexing system
- Make half adder
- Medical industry
- RF-based home automation system
