CBTS3257DB,112
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2002 |
| Series | 74CBTS |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer/Demultiplexer |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74CBTS3257 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Family | CBT/FST/QS/5C/B |
| Number of Inputs | 1 |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Propagation Delay (tpd) | 0.25 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
CBTS3257DB,112 Overview
This is a relatively small item of digital switch that is included in the 16-SSOP (0.209, 5.30mm Width) in order to save space on the board.As a result, it is packaged in the way of Tube.Mounting is performed using Surface Mount.For the analog part of the multiplexers, an IC Multiplexer/Demultiplexer is used.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.The multiplexers can be used for a wide range of applications since they are members of 74CBTS series.There are 16 terminations included in its basic configuration.As its base part number is 74CBTS3257, logic switch can also be used to find its related parts.For multiplexer's system, 5V voltage is supplied.There are 16 component pins in this turn signal switch.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.The CBT/FST/QS/5C/B family includes the logic switch.It is recommended that the minimum supply voltage (Vsup) be kept at 4.5V to avoid some unnecessary failures.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.Normally, 5V is powered by a battery.There are 2 outputs designed to operate the turn signal switch.Other Logic ICs is the classification for this the digital switch ic.This multiplexer is equipped with 1 inputs and 1 outputs.
CBTS3257DB,112 Features
Supplied in the 16-SSOP (0.209, 5.30mm Width) package
Power supplies of 5V
CBTS3257DB,112 Applications
There are a lot of NXP USA Inc. CBTS3257DB,112 Signal Switches / Multiplexers / Decoders applications.
- Telephone network
- Time division multiplexing system
- Image transmission
- Small scale TV wall
- RF-based home automation system
- High-performance memory systems
- High-performance memory-decoding applications
- VGA
- Communication system
- Microprocessor instruction decoding
