CC430F5137IRGZT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 48 |
| Weight | 139.989945mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Type | TxRx + MCU |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.2V |
| Terminal Pitch | 0.5mm |
| Depth | 7mm |
| Frequency | 300MHz~348MHz 389MHz~464MHz 779MHz~928MHz |
| Base Part Number | CC430F5137 |
| Pin Count | 48 |
| Interface | I2C, IrDA, SPI, UART |
| Memory Size | 32kB Flash 4kB SRAM |
| Number of I/O | 30 |
| RAM Size | 4kB |
| Memory Type | FLASH |
| Number of Bits | 12 |
| Peripherals | PWM, Temp Sensor |
| Watchdog Timer | Yes |
| Data Bus Width | 16b |
| Number of Timers/Counters | 2 |
| Core Architecture | MSP430 |
| Number of A/D Converters | 6 |
| Power - Output | 13dBm |
| RF Family/Standard | General ISM < 1GHz |
| Number of UART Channels | 1 |
| Data Rate (Max) | 500kBaud |
| Serial Interfaces | I2C, IrDA, JTAG, SPI, UART |
| Current - Receiving | 15mA~18.5mA |
| Current - Transmitting | 15mA~36mA |
| Modulation | 2FSK, 2GFSK, ASK, MSK, OOK |
| Sensitivity (dBm) | -117 dBm |
| Height | 1mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CC430F5137IRGZT Overview
There is also a 48-VFQFN Exposed Pad package that RF transceiver IC is used to save space on the board. In order to mount the RF transceiver's mounting, Surface Mount is used.In this case, it emerges as a TxRx + MCU with transceiver RF's a high efficiency.High reliability can be achieved by using the advanced transceiver RF' packaging Tape & Reel (TR).48 pins are on the transceiver RF circuit board.Try searching with CC430F5137 if you're looking for variants.RF transceiver operates on the basis of the frequency of 300MHz~348MHz 389MHz~464MHz 779MHz~928MHz.
CC430F5137IRGZT Features
48-VFQFN Exposed Pad package
Surface Mount for mounting
TxRx + MCU
Tape & Reel (TR) is used
48 pins
Use CC430F5137
CC430F5137IRGZT Applications
There are a lot of Texas Instruments CC430F5137IRGZT RF Transceiver ICs applications.
- Digital Remote
- Power Amplifier (PA)
- Low Noise Amplifier (LNA)
- Thermostats
- Internet of Things (IoT)
- LED Lighting
- Health and Fitness
- Internet Radio
- Location and Asset Tracking
- HVAC
