Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
8 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tube |
Series |
74CB |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
8 |
Type |
Bus Switch |
Resistance |
66Ohm |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Voltage - Supply |
2.3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
CB3Q3306 |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Circuit |
1 x 1:1 |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
3.3V |
Number of Channels |
2 |
Number of Ports |
2 |
Number of Bits |
1 |
Propagation Delay |
14 ns |
Quiescent Current |
250μA |
Output Characteristics |
3-STATE |
Bandwidth |
500MHz |
Output Polarity |
TRUE |
High Level Output Current |
-64mA |
Low Level Output Current |
64mA |
Power Supply Current-Max (ICC) |
0.7mA |
Voltage Supply Source |
Single Supply |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
1.2mm |
Length |
3mm |
Width |
4.4mm |
Thickness |
1mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
CCB3Q3306AMPWEP Overview
In order to save board space, digital switch is located in the 8-TSSOP (0.173, 4.40mm Width).As a result, it is packaged in the way of Tube.For mounting, digital switch ic uses the method Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.By keeping the operating temperature at -55°C~125°C TA, turn signal switch will not be affected by external factors.Using a 2.3V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.The multiplexers from 74CB series can be used for a wide range of applications.The basic configuration includes 8 terminations.In addition, it also has a base part number of CB3Q3306, which can be used to find related parts.The multiplexer's system works with 2.5V voltage.In this turn signal switch, there are 8 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.Currently, it is configured with a 8 pin configuration.The multiplexer ic is mounted in the direction of Surface Mount.The multiplexer ic provides 1 bits.The maximal supply voltage (Vsup) should be kept at 3.6V to avoid some unnecessary failures.A power supply is provided for mux switch's normal operation of 3.3V.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.Without the influence of external factors, it consumes 250μA current of multiplexer ic.A resistance of 2 is used to operate the signal switching.This signal switching operates at a resistance of 66Ohm.In the turn signal switch's circuit, there are 2 channels used for transmission.
CCB3Q3306AMPWEP Features
Supplied in the 8-TSSOP (0.173, 4.40mm Width) package
Power supplies of 3.3V
CCB3Q3306AMPWEP Applications
There are a lot of Texas Instruments CCB3Q3306AMPWEP Signal Switches / Multiplexers / Decoders applications.
- To select different task for memory in microprocessor memory systems
- Data transfer
- Data distribution
- GLAN
- Solenoid cooling fan
- Robotic vehicles
- Microprocessor input/output systems
- Logic circuits
- Idle motor
- Video transmission