CCB3Q3306AMPWREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CB |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 66Ohm |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CB3Q3306 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Number of Channels | 2 |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Quiescent Current | 250μA |
| Output Characteristics | 3-STATE |
| Bandwidth | 500MHz |
| Output Polarity | TRUE |
| Power Supply Current-Max (ICC) | 0.7mA |
| Voltage Supply Source | Single Supply |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CCB3Q3306AMPWREP Overview
Due to the fact that it is provided in the 8-TSSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.It is packaged according to the Tape & Reel (TR) method.digital switch ic uses the method of Surface Mount for mounting.In the multiplexers, the analog IC Bus Switch is used.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 2.3V~3.6V.provides digital controlled switch's digital controlled switch'sAs a member of 74CB series, the multiplexers can be used for a wide range of applications.Among its basic configurations are 8 terminations.The part number for CB3Q3306 can be used to find its logic switch related parts as well.The multiplexer's system is powered by 2.5V volts.In this turn signal switch, there are 8 components that can be connected to each pin.It is the end of conductors that is represented by GULL WING.The board is configured with 8 pins.The mount is in Surface Mount.In this signal multiplexer, there are 1 bits provided.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.For mux switch's normal operation, power supply 3.3V is provided.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.There are no external influences on this multiplexer ic, so it consumes 250μA current.Currently, the switches is packaged in accordance with the TR method.A resistance of 2 is used to operate the signal switching.In terms of resistance, it has a value of 66Ohm.A total of 2 transmission channels are available in the turn signal switch's circuit.
CCB3Q3306AMPWREP Features
Supplied in the 8-TSSOP (0.173, 4.40mm Width) package
Power supplies of 3.3V
CCB3Q3306AMPWREP Applications
There are a lot of Texas Instruments CCB3Q3306AMPWREP Signal Switches / Multiplexers / Decoders applications.
- LVDS
- Injectors
- Enabling different functions units in microprocessor instruction decoding
- Night vision cameras
- Memory system of computers
- Microprocessor instruction decoding
- A/D converters
- Arithmetic Logic Units
- Combinational circuit
- CPU memory location identification
