CCB3T16210QDGGRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74CB |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 9.5Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CB3T16210 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Circuit | 10 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Nominal Supply Current | 40μA |
| Number of Bits | 20 |
| Propagation Delay | 250 ps |
| Quiescent Current | 40μA |
| Turn On Delay Time | 14 ns |
| Family | CB3T/3VT |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.07mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CCB3T16210QDGGRQ1 Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 48-TFSOP (0.240, 6.10mm Width).Tape & Reel (TR) is the packaging method.The method digital switch ic adopts for mounting is Surface Mount.The analog IC in the multiplexers is identified as Bus Switch.By maintaining the operating temperature at -40°C~125°C, turn signal switch will not be affected by external factors.Designers have greater flexibility when digital controlled switch operates at a 2.3V~3.6V supply voltage.Several applications are possible for Automotive, AEC-Q100, 74CB series multiplexers.Among its basic configurations are 48 terminations.There is a base part number of CB3T16210 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system is supplied with a voltage of 3.3V.Signal switch has 48 component pins.As the end of conductors, it uses GULL WING.As a type of supply, Single is employed.It is configured with 48 pins.The mount is in Surface Mount.In the CB3T/3VT family, the logic switch is included.There are 20 bits signal multiplexer provides.The maximal supply voltage (Vsup) should be kept at 3.6V to avoid some unnecessary failures.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.No external influence consumes 40μA current of multiplexer ic.Currently, the switches is packaged in accordance with the TR method.With a resistance of 0, it operates.With a resistance of 9.5Ohm, it operates.
CCB3T16210QDGGRQ1 Features
Supplied in the 48-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
CCB3T16210QDGGRQ1 Applications
There are a lot of Texas Instruments CCB3T16210QDGGRQ1 Signal Switches / Multiplexers / Decoders applications.
- Robotic vehicles
- Code conversion
- Analog to digital conversion
- Image transmission
- CPU memory location identification
- Data bus control
- High-performance memory-decoding applications
- Home automation system
- Injectors
- Data demultiplexing
