CCBT16245IDGGRQ1
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | CBT16245 |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Circuit | 8 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Output Current | 64mA |
| Number of Bits | 16 |
| Propagation Delay | 7.7 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5.6 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Turn-Off Delay Time | 7.7 ns |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 201.706857mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | Bus Switch |
| Resistance | 20Ohm |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
CCBT16245IDGGRQ1 Overview
This is a relatively small item of digital switch that is included in the 48-TFSOP (0.240, 6.10mm Width) in order to save space on the board.Tape & Reel (TR) represents its packaging.Mounting is performed using Surface Mount.Bus Switch is the analog IC that the multiplexers uses.The operating temperature of -40°C~85°C will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 4.5V~5.5V supply voltage.Multiplexers in the Automotive, AEC-Q100, 74CBT series are suitable for a wide range of applications.There are 48 terminations included in its basic configuration.The base part number is CBT16245, which is also useful when looking up signal switch's related components.The multiplexer's system is powered by 5V voltage.In this turn signal switch, there are 48 components that can be connected to each pin.Conductors terminate at GULL WING in this design.This supply type employs Single.A configuration of 48 pins is used.Surface Mount is the way it is mounted.The logic switch belongs to the family of CBT/FST/QS/5C/B.In this signal multiplexer, there are 16 bits provided.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 4V.For mux switch's normal operation, power supply 5V is provided.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.Not being affected by the external factors, consumes 3μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The switches package is packaged in a way which is consistent with TR.The resistance is 2.It operates with a resistance of 20Ohm.For greater switches' flexibility, 64mA provides the output current.
CCBT16245IDGGRQ1 Features
Supplied in the 48-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
CCBT16245IDGGRQ1 Applications
There are a lot of Texas Instruments CCBT16245IDGGRQ1 Signal Switches / Multiplexers / Decoders applications.
- Decimal decoder
- Data bus control
- Automatic Monitoring systems
- Steel plants
- Enabling block of memory depending on address in memory chips
- Make half adder
- Encrypted communications system
- RF-based home automation system
- To select different devices in microprocessor output
- CPU memory location identification
