CCBTLV3861IPWRG4Q1

24 Terminations2.3V~3.6V 24 Pin CBTLV3861 Signal switchAutomotive, AEC-Q100, 74CBTLV Series 1 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-CCBTLV3861IPWRG4Q1
Package: 24-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 673
Description: 24 Terminations2.3V~3.6V 24 Pin CBTLV3861 Signal switchAutomotive, AEC-Q100, 74CBTLV Series 1 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	24-TSSOP (0.173, 4.40mm Width)
Number of Pins	24
Weight	89.499445mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Series	Automotive, AEC-Q100, 74CBTLV
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	24
ECCN Code	EAR99
Type	Bus Switch
Resistance	40Ohm
Subcategory	Bus Driver/Transceivers
Packing Method	TR
Technology	CMOS
Voltage - Supply	2.3V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	CBTLV3861
Pin Count	24
Qualification Status	Not Qualified
Circuit	10 x 1:1
Supply Voltage-Max (Vsup)	3.6V
Power Supplies	2.5/3.3V
Supply Voltage-Min (Vsup)	2.3V
Number of Ports	2
Nominal Supply Current	10μA
Number of Bits	10
Propagation Delay	250 ps
Quiescent Current	10μA
Turn On Delay Time	5.8 ns
Family	CBTLV/3B
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	200MHz
Output Polarity	TRUE
Prop. Delay@Nom-Sup	0.25 ns
High Level Output Current	-128mA
Low Level Output Current	128mA
Power Supply Current-Max (ICC)	0.003mA
Voltage Supply Source	Single Supply
Independent Circuits	1
Count Direction	BIDIRECTIONAL
Translation	N/A
Height	1.2mm
Length	7.8mm
Width	4.4mm
Thickness	1mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CCBTLV3861IPWRG4Q1 Overview

It is included in the 24-TSSOP (0.173, 4.40mm Width) in order to save board space.It is packaged according to the Tape & Reel (TR) method.The method digital switch ic adopts for mounting is Surface Mount.Bus Switch is the analog IC that the multiplexers uses.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.With a supply voltage of 2.3V~3.6V, designers have greater flexibility of digital controlled switch.Multiplexers of the Automotive, AEC-Q100, 74CBTLV series can be used in a wide range of applications.There is a design for terminating 24 as part of its basic configuration.The base part number is CBTLV3861, which can also be used to find its logic switch related parts.The multiplexer's system works with 2.5V voltage.This turn signal switch has 24 component pins.Conductors terminate at GULL WING in this design.In this case, Single is employed as the supply type.A configuration of 24 pins is used.The mounting is in the way of Surface Mount.The logic switch is included into the family of CBTLV/3B.The multiplexer ic provides 10 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 2.3V to avoid some unnecessary failures.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.Normally, 2.5/3.3V is powered by a battery.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.Not being affected by the external factors, consumes 10μA current of multiplexer ic.The signal switching is packaged by TR. The resistance is 2.The system operates with a resistance of 40Ohm.