Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
24 |
Weight |
88.904105mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
Automotive, AEC-Q100, 74CBTLV |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
40Ohm |
Subcategory |
Bus Driver/Transceiver |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2.3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.65mm |
Base Part Number |
CBTLV3861 |
Pin Count |
24 |
Circuit |
10 x 1:1 |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
2.5/3.3V |
Supply Voltage-Min (Vsup) |
2.3V |
Number of Ports |
2 |
Nominal Supply Current |
10μA |
Number of Bits |
10 |
Propagation Delay |
250 ps |
Quiescent Current |
10μA |
Turn On Delay Time |
5.8 ns |
Family |
CBTLV/3B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
Output Polarity |
TRUE |
Prop. Delay@Nom-Sup |
0.25 ns |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.003mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
1.2mm |
Length |
7.8mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CCBTLV3861IPWRQ1 Overview
It is included in the 24-TSSOP (0.173, 4.40mm Width) in order to save board space.The package is packaged in accordance with Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.Bus Switch is the analog IC that the multiplexers uses.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.A supply voltage of 2.3V~3.6V provides digital controlled switch's superior flexibility for designers.In addition to being a member of the Automotive, AEC-Q100, 74CBTLV series, these multiplexers have a wide range of applications.As part of its basic configuration, 24 terminations are designed as a part of it.The base part number is CBTLV3861, which is also useful when looking up signal switch's related components.The turn signal switch is supplied with a voltage of 2.5V volts.A component pin count of 24 is found on this turn signal switch.As a result, conductors end at GULL WING.There is a supply type of Single employed as part of this supply.This multiplexer ic is configured with 24 pins.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is a member of the CBTLV/3B family.The multiplexer ic provides 10 bits.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 2.3V.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V so as to avoid some unnecessary failures.During mux switch's normal operation, 2.5/3.3V is provided with a power supply.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceiver.Without the influence of external factors, it consumes 10μA current of multiplexer ic.The switches is packaged according to the way of TR.A resistance of 2 governs its operation.This signal switching operates at a resistance of 40Ohm.
CCBTLV3861IPWRQ1 Features
Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
CCBTLV3861IPWRQ1 Applications
There are a lot of Texas Instruments CCBTLV3861IPWRQ1 Signal Switches / Multiplexers / Decoders applications.
- Relay
- Injectors
- Code converters
- Implementing boolean functions with multiple variables
- Signal router
- Logic gates for other digital devices
- Speed synchronization of multiple motors in industries
- D/A converters
- Make half adder
- Metal detectors