CD40102BPWR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -55°C~105°C |
| Packaging | Cut Tape (CT) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 4.8MHz |
| Base Part Number | CD40102 |
| Pin Count | 16 |
| Number of Elements | 2 |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Number of Bits | 1 |
| Propagation Delay | 600 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 600 ns |
| Reset | Asynchronous |
| Logic Function | Counter |
| Direction | Down |
| Logic Type | BCD Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 0.03mA |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 2.4MHz |
| Timing | Synchronous |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
CD40102BPWR Overview
A device of this type is supplied in a package of type [0]. This configuration uses 16terminations. The supply voltage of 5V permits it to operate with full flexibility. The 2elements are connected by wires. All component pins are equal to 16. As [0], it is packaged. As part of the circuit, there are 16pins that connect other components. It is mounted in the way of [0]. Due to its membership in the 4000Bseries, it is suitable for a variety of applications. It is adopted that the logic type is [0]. It is recommended to set the operating temperature to -55°C~105°C. This device is mounted in the Surface Mountposition. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. The array has 4elements. As far as the device is concerned, there are 1bits of information. Based on the Pbfree code, the result may be yes. Under its base part number of [0], you will find additional related parts. It is packed using [0]. A voltage of 3V is the minimum supply voltage (Vsup). A frequency of 4.8MHzis used for operation. There is a quiescent current consumption at 100μA.
CD40102BPWR Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
4 bits per element
Frequency of 4.8MHz
CD40102BPWR Applications
There are a lot of Texas Instruments CD40102BPWR Counters & Dividers applications.
- Fixed or Programmable Frequency Division
- DIVISION
- Digital multiplexing and demultiplexing
- Control counters
- LINEARIZATION
- Frequency division
- counting/frequency sy nthesizers-BCD output
- Programmable decade counters
- Counter control/timers
- Programmable binary and decade
