CD4010BMG4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Gates |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 6 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 6 |
| Polarity | Non-Inverting |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Load Capacitance | 50pF |
| Propagation Delay | 200 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 200 ns |
| Logic Function | Buffer |
| Output Characteristics | OPEN-DRAIN |
| Max I(ol) | 0.03 A |
| Number of Bits per Element | 1 |
| High Level Output Current | -1.65mA |
| Low Level Output Current | 30mA |
| Schmitt Trigger | NO |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD4010BMG4 Overview
Logical driver uses a neat SOIC package. Rail/Tube external packaging. All of the 6 elements are put into use. 16 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. 16 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 16 pins. The bus transceiver employs 1 bits for each element. Specifically, digital transciever is a kind of Gates. In quiescent state, the electronic part uses 20μA. Voltage buffer is capable of operating under temperature as low as -55°C. Digital buffer should operate with ambient temperature no higher than 125°C. Buffer driver outputs 30mA to its low level. In high level output mode, the electronic parts may conduct -1.65mA of current. Voltage used to run voltage buffer should be 3V at least. In regard to the maximum supply voltage, buffer driver is rated 18V.
CD4010BMG4 Features
Gates
High Level Output: 30mA
Low Level Output: -1.65mA
CD4010BMG4 Applications
There are a lot of Texas Instruments CD4010BMG4 Buffers & Transceivers applications.
- Home theater wiring-free
- Wired telephone
- Pocket PC
- Wireless smart house
- Wireless security systems
- TV signal transmission
- Wireless network systems
- Changeing the frequency from IF to RF
- Bar, KTV wireless entertainment
- Remote controls
