CD4013BCM
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Supplier Device Package | 14-SOIC |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2002 |
| Series | 4000B |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| Type | D-Type |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Voltage - Supply | 3V~15V |
| Frequency | 15.5MHz |
| Base Part Number | 4013 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Voltage | 18V |
| Number of Circuits | 2 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 3V |
| Output Current | 8.8mA |
| Number of Bits | 2 |
| Clock Frequency | 15.5MHz |
| Propagation Delay | 350 ns |
| Turn On Delay Time | 65 ns |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Number of Inputs | 1 |
| Current - Output High, Low | 8.8mA 8.8mA |
| Number of Gates | 2 |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 120ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -4.2mA |
| Input Capacitance | 5pF |
| Low Level Output Current | 4.2mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD4013BCM Overview
The item is packaged in 14-SOIC (0.154, 3.90mm Width)cases. The Tubepackage contains it. In the configuration, Differentialis used as the output. This trigger uses the value Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 3V~15V volts. It is operating at a temperature of -55°C~125°C TA. It is an electronic flip flop with the type D-Type. In this case, it is a type of FPGA belonging to the 4000B series. You should not exceed 15.5MHzin the output frequency of the device. A total of 2elements are contained within it. It consumes 4μA of quiescent The object belongs to the 4013 family. This JK flip flop has a 5pFfarad input capacitance. It is mounted by the way of Surface Mount. It is designed with 14 pins. Its clock edge trigger type is Positive Edge. Flip flops designed with 2bits are used in this part. Despite its superior flexibility, it relies on 2 circuits to achieve it. With an output current of 8.8mA, this device offers maximum design flexibility. It operates with 1 output lines. The number of input lines is 1. There is -4.2mA output current at the high level. The low level output current is set to 4.2mA. If the operating temperature is lower than 125°C, it is recommended. If the operating temperature is higher than -55°C, the system should operate properly. A minimum supply voltage of 3V is required for these RS flip flops to operate. A maximum voltage of 15V can be provided by it. This can be achieved at a frequency of 15.5MHz. Its basic building block contains 2 gates. D flip flop is employed 1inputs.
CD4013BCM Features
Tube package
4000B series
14 pins
2 Bits
2 gates
CD4013BCM Applications
There are a lot of ON Semiconductor CD4013BCM Flip Flops applications.
- Event Detectors
- Individual Asynchronous Resets
- Computers
- Convert a momentary switch to a toggle switch
- Circuit Design
- ESD protection
- Reduced system switching noise
- EMI reduction circuitry
- Supports Live Insertion
- Modulo – n – counter
