CD4013BCMX
| Parameters | |
|---|---|
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| Series | 4000B |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Voltage - Supply | 3V~15V |
| Frequency | 15.5MHz |
| Base Part Number | 4013 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 3V |
| Output Current | 8.8mA |
| Number of Bits | 2 |
| Clock Frequency | 15.5MHz |
| Propagation Delay | 350 ns |
| Turn On Delay Time | 65 ns |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8.8mA 8.8mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 120ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -4.2mA |
| Input Capacitance | 5pF |
| Low Level Output Current | 4.2mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Supplier Device Package | 14-SOIC |
CD4013BCMX Overview
14-SOIC (0.154, 3.90mm Width)is the way it is packaged. The Tape & Reel (TR)package contains it. T flip flop uses Differentialas its output configuration. This trigger is configured to use Positive Edge. Surface Mountmounts this electrical part. It operates with a supply voltage of 3V~15V. Currently, the operating temperature is -55°C~125°C TA. The type of this D latch is D-Type. In this case, it is a type of FPGA belonging to the 4000B series. Its output frequency should not exceed 15.5MHz. In total, it contains 2 elements. T flip flop consumes 4μA quiescent energy. The 4013 family contains it. The input capacitance of this JK flip flopis 5pF farads. There is an electronic component mounted in the way of Surface Mount. With its 14pins, it is designed to work with most electronic flip flops. This device's clock edge trigger type is Positive Edge. This flip flop is designed with 2 Bits. To achieve this superior flexibility, 2 circuits are used. The 8.8mA output current allows it to be designed with the greatest amount of flexibility. It is designed with 1 output lines. Currently, there are 1 input lines present. -4.2mAis set as the high level output current. There is no low level output current set at 4.2mA. A temperature below 125°Cis recommended for operation. It is recommended that the operating temperature is higher than -55°C. The minimal supply voltage is 3V. It supports the maximal supply voltage of 15V. The frequency that can be achieved is 15.5MHz.
CD4013BCMX Features
Tape & Reel (TR) package
4000B series
14 pins
2 Bits
CD4013BCMX Applications
There are a lot of ON Semiconductor CD4013BCMX Flip Flops applications.
- Memory
- Reduced system switching noise
- Data Synchronizers
- Instrumentation
- Frequency Divider circuits
- Power down protection
- Latch
- 2 – Bit synchronous counter
- Buffered Clock
- Bus hold
