CD4013BE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Base Part Number | CD4013 |
| Function | Set(Preset) and Reset |
| Number of Outputs | 4 |
| Output Type | Differential |
| Operating Supply Voltage | 10V |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Power Dissipation | 100mW |
| Output Current | 6.8mA |
| Clock Frequency | 24MHz |
| Propagation Delay | 300 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 45 ns |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 6.8mA 6.8mA |
| Max I(ol) | 0.0068 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 90ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Power Supply Current-Max (ICC) | 0.06mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 3500000Hz |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4013BE Overview
The flip flop is packaged in a case of 14-DIP (0.300, 7.62mm). A package named Tubeincludes it. The output it is configured with uses Differential. The trigger configured with it uses Positive Edge. Through Holeis in the way of this electric part. With a supply voltage of 3V~18V volts, it operates. It is operating at a temperature of -55°C~125°C TA. Logic flip flops of this type are classified as D-Type. JK flip flop belongs to the 4000Bseries of FPGAs. This D flip flop should not have a frequency greater than 24MHz. It consumes 4μA of quiescent A total of 14 terminations have been made. This D latch belongs to the family of CD4013. The power source is powered by 5V. The input capacitance of this JK flip flopis 5pF farads. This electronic part is mounted in the way of Through Hole. The electronic flip flop is designed with pins 14. This device's clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. Normal operation requires a supply voltage (Vsup) above 3V. Optimal efficiency requires a supply voltage of 10V. It offers maximum design flexibility with its output current of 6.8mA. It has 1 output lines to operate. In terms of quiescent current, it consumes 20μA . A total of 2 channels are available.
CD4013BE Features
Tube package
4000B series
14 pins
CD4013BE Applications
There are a lot of Texas Instruments CD4013BE Flip Flops applications.
- Consumer
- Dynamic threshold performance
- Modulo – n – counter
- Storage registers
- ESD protection
- Divide a clock signal by 2 or 4
- Clock pulse
- Automotive
- High Performance Logic for test systems
- CMOS Process
