CD4013BMT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latch |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | CD4013 |
| Function | Set(Preset) and Reset |
| Number of Outputs | 4 |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 6.8mA |
| Clock Frequency | 24MHz |
| Propagation Delay | 400 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 45 ns |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 6.8mA 6.8mA |
| Max I(ol) | 0.0068 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 90ns @ 15V, 50pF |
| Prop. Delay@Nom-Sup | 300 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Power Supply Current-Max (ICC) | 0.06mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 3500000Hz |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4013BMT Overview
It is embeded in 14-SOIC (0.154, 3.90mm Width) case. It is included in the package Tape & Reel (TR). There is a Differentialoutput configured with it. It is configured with a trigger that uses a value of Positive Edge. The electronic part is mounted in the way of Surface Mount. The JK flip flop operates at 3V~18Vvolts. It is operating at -55°C~125°C TA. This electronic flip flop is of type D-Type. JK flip flop is a part of the 4000Bseries of FPGAs. There should be no greater frequency than 24MHzon its output. Despite external influences, it consumes 4μAof quiescent current. There are 14 terminations,Members of the CD4013family make up this object. The power supply voltage is 5V. A 5pFfarad input capacitance is provided by this T flip flop. The electronic part is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 14. This device exhibits a clock edge trigger type of Positive Edge. It is included in FF/Latch. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 3V. 2 circuits are used to achieve its superior flexibility. On the basis of its reliable performance, this D flip flop is well suited for use with TR. Its output current of 6.8mAallows for maximum design flexibility. There are 1 output lines in this JK flip flop. It consumes 20μA of quiescent current without being affected by external factors.
CD4013BMT Features
Tape & Reel (TR) package
4000B series
14 pins
CD4013BMT Applications
There are a lot of Texas Instruments CD4013BMT Flip Flops applications.
- Frequency Divider circuits
- Circuit Design
- Control circuits
- ESCC
- ESD performance
- Buffer registers
- Matched Rise and Fall
- Common Clocks
- Communications
- Guaranteed simultaneous switching noise level
