CD4013BPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latch |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | CD4013 |
| Function | Set(Preset) and Reset |
| Number of Outputs | 4 |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 6.8mA |
| Clock Frequency | 24MHz |
| Propagation Delay | 300 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 45 ns |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 6.8mA 6.8mA |
| Max I(ol) | 0.0068 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 90ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Power Supply Current-Max (ICC) | 0.06mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 3500000Hz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4013BPWR Overview
The package is in the form of 14-TSSOP (0.173, 4.40mm Width). The Cut Tape (CT)package contains it. In the configuration, Differentialis used as the output. The trigger configured with it uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. The supply voltage is set to 3V~18V. In this case, the operating temperature is -55°C~125°C TA. This electronic flip flop is of type D-Type. JK flip flop is a part of the 4000Bseries of FPGAs. There should be no greater frequency than 24MHzon its output. During its operation, it consumes 4μA quiescent energy. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is a member of the CD4013 family. It is powered by a voltage of 5V . This JK flip flop has a 5pFfarad input capacitance. Surface Mount mounts this electronic component. This board is designed with 14pins on it. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. There is a base part number FF/Latchfor the RS flip flops. Normal operation requires a supply voltage (Vsup) above 3V. In order to achieve its superior flexibility, 2 circuits are used. On the basis of its reliable performance, this D flip flop is well suited for use with TR. This T flip flop features a maximum design flexibility due to its output current of 6.8mA. There are no output lines on the JK flip flop. 20μAquiescent current consumed.
CD4013BPWR Features
Cut Tape (CT) package
4000B series
14 pins
CD4013BPWR Applications
There are a lot of Texas Instruments CD4013BPWR Flip Flops applications.
- QML qualified product
- Consumer
- Buffered Clock
- Guaranteed simultaneous switching noise level
- Counters
- Shift registers
- Automotive
- Latch-up performance
- Individual Asynchronous Resets
- Patented noise
