CD4013BPWRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latch |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4013 |
| Function | Set(Preset) and Reset |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 24MHz |
| Propagation Delay | 300 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 45 ns |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 6.8mA 6.8mA |
| Max I(ol) | 0.0068 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 90ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Power Supply Current-Max (ICC) | 0.06mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 3500000Hz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4013BPWRE4 Overview
It is packaged in the way of 14-TSSOP (0.173, 4.40mm Width). As part of the package Tape & Reel (TR), it is embedded. This output is configured with Differential. This trigger uses the value Positive Edge. There is an electronic component mounted in the way of Surface Mount. A voltage of 3V~18Vis used as the supply voltage. It is operating at a temperature of -55°C~125°C TA. Logic flip flops of this type are classified as D-Type. In this case, it is a type of FPGA belonging to the 4000B series. A frequency of 24MHzshould not be exceeded by its output. There is 4μA quiescent consumption. There have been 14 terminations. The CD4013family includes it. The power supply voltage is 5V. Its input capacitance is 5pFfarads. There is an electronic part that is mounted in the way of Surface Mount. With its 14pins, it is designed to work with most electronic flip flops. This device's clock edge trigger type is Positive Edge. This device has the base part number FF/Latch. Normally, the supply voltage (Vsup) should be kept above 3V. Its flexibility is enhanced by 2 circuits. A reliable performance of this D flip flop makes it well suited for use in TR. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. It consumes a total of 20μA quiescent current at any given time.
CD4013BPWRE4 Features
Tape & Reel (TR) package
4000B series
14 pins
CD4013BPWRE4 Applications
There are a lot of Texas Instruments CD4013BPWRE4 Flip Flops applications.
- Data storage
- Set-reset capability
- Parallel data storage
- Patented noise
- Memory
- Control circuits
- Frequency Divider circuits
- Communications
- Single Down Count-Control Line
- 2 – Bit synchronous counter
