CD4013BPWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | CD4013 |
| Function | Set(Preset) and Reset |
| Number of Outputs | 4 |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 24MHz |
| Propagation Delay | 300 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 45 ns |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 6.8mA 6.8mA |
| Max I(ol) | 0.0068 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 90ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Power Supply Current-Max (ICC) | 0.06mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 3500000Hz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4013BPWRG4 Overview
It is embeded in 14-TSSOP (0.173, 4.40mm Width) case. A package named Tape & Reel (TR)includes it. T flip flop uses Differentialas its output configuration. JK flip flop uses Positive Edgeas the trigger. Surface Mountis in the way of this electric part. The JK flip flop operates at 3V~18Vvolts. A temperature of -55°C~125°C TAis used in the operation. This electronic flip flop is of type D-Type. This type of FPGA is a part of the 4000B series. You should not exceed 24MHzin the output frequency of the device. There is a consumption of 4μAof quiescent energy. Currently, there are 14 terminations. It is a member of the CD4013 family. An input voltage of 5Vpowers the D latch. Input capacitance of this device is 5pF farads. It is mounted in the way of Surface Mount. Basically, it is designed with a set of 14 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This device has the base part number FF/Latches. A normal operating voltage (Vsup) should remain above 3V. The superior flexibility of this circuit is achieved by using 2 circuits. In light of its reliable performance, this T flip flop is well suited for TR. There are 1 output lines in this JK flip flop. There is a consumption of 20μAof quiescent current from it.
CD4013BPWRG4 Features
Tape & Reel (TR) package
4000B series
14 pins
CD4013BPWRG4 Applications
There are a lot of Texas Instruments CD4013BPWRG4 Flip Flops applications.
- Load Control
- Reduced system switching noise
- Computers
- Memory
- Automotive
- Latch
- Differential Individual
- ESD performance
- Guaranteed simultaneous switching noise level
- Control circuits
