CD4016BCM
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Supplier Device Package | 14-SOIC |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Published | 2002 |
| Series | 4000B |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| Type | Bilateral, FET Switches |
| Resistance | 400Ohm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Max Power Dissipation | 500mW |
| Voltage - Supply | 3V~15V |
| Base Part Number | 4016 |
| Number of Outputs | 4 |
| Circuit | 1 x 1:1 |
| Polarity | Non-Inverting |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 10nA |
| Power Dissipation | 500mW |
| Max Supply Current | 1μA |
| Number of Bits | 4 |
| Throw Configuration | SPST |
| Quiescent Current | 10nA |
| Turn On Delay Time | 50 ns |
| Number of Inputs | 4 |
| Supply Type | Dual, Single |
| Bandwidth | 40MHz |
| Turn-Off Delay Time | 40 ns |
| Max Dual Supply Voltage | 7.5V |
| Number of Gates | 4 |
| Min Dual Supply Voltage | 1.5V |
| Voltage Supply Source | Dual Supply |
| Independent Circuits | 4 |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD4016BCM Overview
For the purpose of saving board space, digital switch is included in the 14-SOIC (0.154, 3.90mm Width).The package is packaged in accordance with Tube.digital switch ic uses the method of Surface Mount for mounting.the multiplexers uses IC Bilateral, FET Switches as the analog IC.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -55°C~125°C.Designers have greater flexibility when digital controlled switch operates at a 3V~15V supply voltage.Multiplexers of the 4000B series can be used in a wide range of applications.As its base part number is 4016, logic switch can also be used to find its related parts.There is a type of supply Dual, Single that is employed in this case.A total of 14 pins are configured on this board.As you can see, it is mounted in the direction of Surface Mount.The multiplexer ic provides 4 bits.As part of the operation of this turn signal switch, there are 4 outputs.Without the influence of external factors, it consumes 10nA current of multiplexer ic.This multiplexer has a total of 4 inputs.It operates with a resistance of 400Ohm.In the turn signal switch's circuit, there are 4 channels used for transmission.Signal switch operation at 125°C temperature is acceptable.It is recommended that a minimum operating temperature of the multiplexer of -55°C be maintained.Based on the device specifications, the signal switches is designed to operate at 15V maximum supply voltage.In compliance with the applicable device specification, the digital swith operates at a minimum supply voltage of 3V.It is necessary for the digitalswitch to operate normally that 4 circuits be formed.
CD4016BCM Features
Supplied in the 14-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Dual, Single
CD4016BCM Applications
There are a lot of ON Semiconductor CD4016BCM Signal Switches / Multiplexers / Decoders applications.
- Transmission from the computer system of a satellite
- Computer memory
- Analog, digital or video signal switching
- Enabling different rows of memory depending on address in memory chips
- Solenoid cooling fan
- Recording transmission
- Data-routing applications
- HD surveillance system
- D/A converters
- Metal detectors
