CD4016BCN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Supplier Device Package | 14-PDIP |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Published | 2002 |
| Series | 4000B |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Through Hole |
| Type | Bilateral, FET Switches |
| Resistance | 400Ohm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Max Power Dissipation | 700mW |
| Voltage - Supply | 3V~15V |
| Base Part Number | 4016 |
| Number of Outputs | 4 |
| Circuit | 1 x 1:1 |
| Polarity | Non-Inverting |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 10nA |
| Power Dissipation | 700mW |
| Max Supply Current | 1μA |
| Number of Bits | 4 |
| Throw Configuration | SPST |
| Quiescent Current | 10nA |
| Turn On Delay Time | 50 ns |
| Number of Inputs | 4 |
| Supply Type | Dual, Single |
| Bandwidth | 40MHz |
| Turn-Off Delay Time | 40 ns |
| Max Dual Supply Voltage | 7.5V |
| Number of Gates | 4 |
| Min Dual Supply Voltage | 1.5V |
| Voltage Supply Source | Dual Supply |
| Independent Circuits | 4 |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD4016BCN Overview
In order to conserve board space, digital switch is included in the 14-DIP (0.300, 7.62mm).As a result, it is packaged in a way that is referred to as Tube.In terms of mounting, digital switch ic uses the Through Hole method .The analog IC in the multiplexers is identified as Bilateral, FET Switches.As long as the operating temperature is -55°C~125°C, turn signal switch will not be influenced by external factors.Designers have greater flexibility using digital controlled switch when it works with 3V~15V voltage.With the 4000B series, the multiplexers are suitable for a diverse range of applications.The base part number is 4016, so you can find its logic switch related parts using that number.As a type of supply, Dual, Single is employed.This multiplexer ic is configured with 14 pins.It is positioned in the direction of Through Hole.Signal multiplexer consists of 4 bits.As a result, the turn signal switch consists of 4 outputs.Without any external influences, it consumes 10nA current of multiplexer ic at all times.There are 4 inputs provided in this multiplexer.As far as the resistance is concerned, it operates with 400Ohm.This turn signal switch's circuit uses 4 transmission channels.The signal switch can operate at a maximum temperature of 125°C.In order to maintain a minimal operating temperature, the temperature of the multiplexer should be set to -55°C.Upon compliance with the applicable device specifications, the device will operate at the maximum supply voltage of 15V.The digital swith is specified to operate at the minimum supply voltage of 3V in compliance with the applicable device specification.The digitalswitch relies on 4 circuits to function normally.
CD4016BCN Features
Supplied in the 14-DIP (0.300, 7.62mm) package
Adopting a supply type of Dual, Single
CD4016BCN Applications
There are a lot of ON Semiconductor CD4016BCN Signal Switches / Multiplexers / Decoders applications.
- GLAN
- Speed control of medern motors
- Enabling different functions units in microprocessor instruction decoding
- Idle motor
- High-performance memory-decoding applications
- Analog, digital or video signal switching
- Speed synchronization of multiple motors in industries
- Data demultiplexing
- Enabling different rows of memory depending on address in memory chips
- Time division multiplexing system
