CD4016BE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Bilateral, FET Switches |
| Resistance | 400Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Number of Functions | 4 |
| Supply Voltage | 10V |
| Base Part Number | CD4016 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Circuit | 1 x 1:1 |
| Polarity | Non-Inverting |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Nominal Supply Current | 20nA |
| Power Dissipation | 500mW |
| Max Supply Current | 5μA |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Quiescent Current | 20nA |
| Turn On Delay Time | 30 ns |
| Supply Type | Dual, Single |
| Bandwidth | 40MHz |
| Turn-Off Delay Time | 30 ns |
| Max Dual Supply Voltage | 9V |
| Min Dual Supply Voltage | 1.5V |
| Input Capacitance | 5pF |
| Off-state Isolation-Nom | 50 dB |
| Voltage Supply Source | Dual Supply |
| On-state Resistance Match-Nom | 10Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Drain to Source Resistance | 660Ohm |
| Normal Position | NO |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4016BE Overview
Digital switch is provided in the 14-DIP (0.300, 7.62mm) for the purpose of saving board space.It is packaged according to the Tube method.The method digital switch ic adopts for mounting is Through Hole.The multiplexers uses an analog IC Bilateral, FET Switches as the analog part of the circuit.When the operating temperature is kept at -55°C~125°C, the machine will not be sensturn signal switchive to external influences.Using a 3V~18V supply voltage provides digital controlled switch's superior flexibility for designers.As a member of 4000B series, the multiplexers can be used for a wide range of applications.Among its basic configurations are 14 terminations.In addition, it also has a base part number of CD4016, which can be used to find related parts.The multiplexer's system is powered by 10V voltage.This turn signal switch has 14 component pins.There is a type of supply Dual, Single that is employed in this case.This multiplexer ic has 14 pins configured.The mounting point is Through Hole.Signal multiplexer provides 1 bits.Multiplexer or Switches is a category for the digital switch ics.It consumes 20nA current of multiplexer ic since it is not affected by external factors.A resistance of 400Ohm is used to operate the signal switching.A total of 4 channels are used for transmission in the turn signal switch's circuit.It is necessary for the digitalswitch to operate normally that 4 circuits be formed.
CD4016BE Features
Supplied in the 14-DIP (0.300, 7.62mm) package
Adopting a supply type of Dual, Single
CD4016BE Applications
There are a lot of Texas Instruments CD4016BE Signal Switches / Multiplexers / Decoders applications.
- Audio transmission
- Make full adder
- Automatic Monitoring systems
- Decimal decoder
- HDMI applications
- Encrypted communications system
- Data bus control
- Code converters
- Computer memory
- Data communication
