CD4016BM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Bilateral, FET Switches |
| Resistance | 2kOhm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 10V |
| Base Part Number | CD4016 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Circuit | 1 x 1:1 |
| Polarity | Non-Inverting |
| Number of Channels | 4 |
| Nominal Supply Current | 20nA |
| Power Dissipation | 500mW |
| Max Supply Current | 5μA |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Quiescent Current | 20nA |
| Turn On Delay Time | 70 ns |
| Number of Inputs | 4 |
| Supply Type | Dual, Single |
| Bandwidth | 40MHz |
| Max Dual Supply Voltage | 9V |
| Min Dual Supply Voltage | 1.5V |
| Off-state Isolation-Nom | 50 dB |
| Voltage Supply Source | Dual Supply |
| On-state Resistance Match-Nom | 10Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Drain to Source Resistance | 850Ohm |
| Normal Position | NO |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4016BM Overview
Due to the fact that it is provided in the 14-SOIC (0.154, 3.90mm Width), digital switch allows the board to be compacted.The package is packaged in accordance with Tube.digital switch ic uses the method of Surface Mount for mounting.In the multiplexers, the analog IC Bilateral, FET Switches is used.The operating temperature of -55°C~125°C will not be susceptible to external factors.The turn signal switch is designed for use with a 3V~18V supply voltage, which gives it a lot of flexibility.In addition to being a member of the 4000B series, these multiplexers have a wide range of applications.As parts of its basic configuration, 14 terminations are desgined.There is a base part number CD4016 that can be used to locate signal switch's related components as well.In multiplexer's system, 10V is the voltage supplied.A component pin count of 14 can be found on this turn signal switch.GULL WING represents the end of conductors.As a type of supply, Dual, Single is employed.There are 14 pins on it.As you can see, it is mounted in the direction of Surface Mount.As a result, signal multiplexer provides a total of 1 bits.Multiplexer or Switches is the classification for this the digital switch ic.It consumes 20nA current of multiplexer ic since it is not affected by external factors.In this multiplexer, there is a total of 4 inputs.As far as the resistance is concerned, it operates with 2kOhm.This turn signal switch's circuit uses 4 transmission channels.
CD4016BM Features
Supplied in the 14-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Dual, Single
CD4016BM Applications
There are a lot of Texas Instruments CD4016BM Signal Switches / Multiplexers / Decoders applications.
- To select different devices in microprocessor output
- Decimal decoder
- Signal router
- Control unit of Central Processing unit (CPU)
- PCIe
- Small scale TV wall
- Electronics industry
- CNC machines
- Textile mills
- Audio transmission
