CD4016BM96
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Bilateral, FET Switches |
| Resistance | 400Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 10V |
| Frequency | 40MHz |
| Base Part Number | CD4016 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Circuit | 1 x 1:1 |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Nominal Supply Current | 20nA |
| Power Dissipation | 500mW |
| Max Supply Current | 5μA |
| Number of Bits | 1 |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 30 ns |
| Supply Type | Dual, Single |
| Bandwidth | 40MHz |
| Turn-Off Delay Time | 30 ns |
| Max Dual Supply Voltage | 9V |
| Min Dual Supply Voltage | 1.5V |
| Off-state Isolation-Nom | 50 dB |
| Voltage Supply Source | Dual Supply |
| On-state Resistance Match-Nom | 10Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Drain to Source Resistance | 400Ohm |
| Normal Position | NO |
| Ambient Temperature Range High | 125°C |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4016BM96 Overview
Due to the fact that it is provided in the 14-SOIC (0.154, 3.90mm Width), digital switch allows the board to be compacted.The package is in the form of Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .the multiplexers uses IC Bilateral, FET Switches as the analog IC.The operating temperature of -55°C~125°C will not be susceptible to external factors.When digital controlled switch operates at 3V~18V, designers are provided with a greater degree of flexibility.The multiplexers can be used for a wide range of applications since they are members of 4000B series.As part of its basic configuration, 14 terminations are designed as a part of it.To find signal switch's related components, a base part number of CD4016 may also be used.The turn signal switch is supplied with a voltage of 10V volts.This turn signal switch has 14 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.In this case, Dual, Single is employed as the supply type.It is configured with 14 pins.It is positioned in the direction of Surface Mount.There are 1 bits signal multiplexer provides.In order for the turn signal switch to work, there are 1 outputs.In electronic terms, the digital switch ic is classified as Multiplexer or Switches.A resistance of 400Ohm is used to operate it.In the turn signal switch's circuit, there are 4 channels used for transmission.During normal operation, the digitalswitch consists of 4 circuits.
CD4016BM96 Features
Supplied in the 14-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Dual, Single
CD4016BM96 Applications
There are a lot of Texas Instruments CD4016BM96 Signal Switches / Multiplexers / Decoders applications.
- Transmission from the computer system of a satellite
- Data transfer
- Control unit of Central Processing unit (CPU)
- Video transmission
- Combinational circuit
- A/D converters
- Data bus control
- LVDS
- Automation system
- Speed control of medern motors
