CD4016BMG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | Bilateral, FET Switches |
| Resistance | 2kOhm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | CD4016 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Circuit | 1 x 1:1 |
| Number of Channels | 4 |
| Nominal Supply Current | 20nA |
| Power Dissipation | 500mW |
| Max Supply Current | 5μA |
| Number of Bits | 1 |
| Turn On Delay Time | 70 ns |
| Number of Inputs | 4 |
| Supply Type | Dual, Single |
| Bandwidth | 40MHz |
| Max Dual Supply Voltage | 9V |
| Min Dual Supply Voltage | 1.5V |
| Off-state Isolation-Nom | 50 dB |
| Voltage Supply Source | Dual Supply |
| On-state Resistance Match-Nom | 10Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NO |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4016BMG4 Overview
It is included in the 14-SOIC (0.154, 3.90mm Width) in order to save board space.It is packaged in the way of Tube.Surface Mount is the mounting method digital switch ic uses.The analog IC used in the multiplexers can be referred to as Bilateral, FET Switches.The operating temperature will not be affected by external factors when turn signal switch is set to -55°C~125°C.With a supply voltage of 3V~18V, designers have greater flexibility of digital controlled switch.In addition to being a member of the 4000B series, these multiplexers have a wide range of applications.This configuration includes 14 terminations as part of its basic functionality.The part number for CD4016 can be used to find its logic switch related parts as well.The multiplexer's system is powered by 5V voltage.There are 14 component pins in this turn signal switch.It is the end of conductors that is represented by GULL WING.There is a type of supply Dual, Single that is employed in this case.With 14 pins, it is configured.The multiplexer ic is mounted in the direction of Surface Mount.Signal multiplexer provides 1 bits.Part number Multiplexer or Switches indicates that the digital switch ic is an electronic part.This multiplexer is equipped with 4 inputs and 4 outputs.A resistance of 2kOhm is used to operate the signal switching.There are a total of 4 channels used for transmitting data in the turn signal switch's circuit.
CD4016BMG4 Features
Supplied in the 14-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Dual, Single
CD4016BMG4 Applications
There are a lot of Texas Instruments CD4016BMG4 Signal Switches / Multiplexers / Decoders applications.
- Steel plants
- Night vision cameras
- HD surveillance system
- Audio transmission
- Medical industry
- Frequency multiplexing system
- Small scale TV wall
- Metal detectors
- Electronically controlled engine system
- Time division multiplexing system
