Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.209, 5.30mm Width) |
Number of Pins |
14 |
Weight |
208.312296mg |
Operating Temperature |
-55°C~125°C |
Packaging |
Cut Tape (CT) |
Series |
4000B |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
Bilateral, FET Switches |
Resistance |
400Ohm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
500mW |
Technology |
CMOS |
Voltage - Supply |
3V~18V |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
10V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
CD4016 |
Output |
SEPARATE OUTPUT |
Pin Count |
14 |
Qualification Status |
Not Qualified |
Circuit |
1 x 1:1 |
Polarity |
Non-Inverting |
Number of Channels |
4 |
Nominal Supply Current |
20nA |
Power Dissipation |
500mW |
Max Supply Current |
5μA |
Number of Bits |
1 |
Throw Configuration |
SPST |
Quiescent Current |
20nA |
Turn On Delay Time |
30 ns |
Number of Inputs |
4 |
Supply Type |
Dual, Single |
Bandwidth |
40MHz |
Turn-Off Delay Time |
30 ns |
Max Dual Supply Voltage |
9V |
Min Dual Supply Voltage |
1.5V |
Off-state Isolation-Nom |
50 dB |
Voltage Supply Source |
Dual Supply |
On-state Resistance Match-Nom |
10Ohm |
Switching |
BREAK-BEFORE-MAKE |
Normal Position |
NO |
Height |
2mm |
Length |
10.3mm |
Width |
5.3mm |
Thickness |
1.95mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CD4016BNSR Overview
In order to conserve board space, digital switch is included in the 14-SOIC (0.209, 5.30mm Width).The package is packaged in the manner of Cut Tape (CT).As far as mounting is concerned, digital switch ic uses Surface Mount.the multiplexers uses an analog IC Bilateral, FET Switches.In the case of -55°C~125°C, turn signal switch will not be affected by external factors.Designers have greater flexibility when digital controlled switch operates at a 3V~18V supply voltage.Multiplexers of the 4000B series can be used in a wide range of applications.This configuration includes 14 terminations as part of its basic functionality.The base part number is CD4016, which can also be used to find its logic switch related parts.For multiplexer's system, a voltage of 10V is supplied.A component pin count of 14 can be found on this turn signal switch.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.There is a type of supply Dual, Single that is employed in this case.This multiplexer ic has 14 pins configured.Surface Mount is the way it is mounted.There are 1 bits in signal multiplexer.This is a signal switch that is categorized as Multiplexer or Switches.Despite not interacting with external factors, it consumes 20nA current of multiplexer ic.There are 4 inputs provided in this multiplexer.This signal switching operates at a resistance of 400Ohm.The turn signal switch's circuit has 4 transmission channels.
CD4016BNSR Features
Supplied in the 14-SOIC (0.209, 5.30mm Width) package
Adopting a supply type of Dual, Single
CD4016BNSR Applications
There are a lot of Texas Instruments CD4016BNSR Signal Switches / Multiplexers / Decoders applications.
- Transmission from the computer system of a satellite
- Code conversion
- A robotic vehicle with the metal detector
- Used to connect a single source to multiple destinations
- Make half adder
- A/D converters
- LVDS
- Paper plants
- GLAN
- Speed control of medern motors