CD4016BPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Bilateral, FET Switches |
| Resistance | 2kOhm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 10V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4016 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 1:1 |
| Number of Channels | 4 |
| Nominal Supply Current | 20nA |
| Power Dissipation | 500mW |
| Max Supply Current | 5μA |
| Number of Bits | 1 |
| Turn On Delay Time | 70 ns |
| Number of Inputs | 4 |
| Supply Type | Dual, Single |
| Bandwidth | 40MHz |
| Max Dual Supply Voltage | 9V |
| Min Dual Supply Voltage | 1.5V |
| Off-state Isolation-Nom | 50 dB |
| Voltage Supply Source | Dual Supply |
| On-state Resistance Match-Nom | 10Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NO |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4016BPWR Overview
Due to the fact that it is provided in the 14-TSSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.Tape & Reel (TR) represents its packaging.Digital switch ic uses a Surface Mount mounting method.A digital IC Bilateral, FET Switches is used as the analog component of the multiplexers.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -55°C~125°C.Using a 3V~18V supply voltage provides digital controlled switch's superior flexibility for designers.Multiplexers in the 4000B series are suitable for a wide range of applications.The basic configuration of this system includes 14 terminations.The base part number is CD4016, which can also be used to find its logic switch related parts.The multiplexer is supplied with 10V voltage.Signal switch has 14 component pins.As a result, conductors end at GULL WING.As a type of supply, Dual, Single is employed.It is configured with 14 pins.The mounting point is Surface Mount.Signal multiplexer provides 1 bits.In electronic terms, the digital switch ic is classified as Multiplexer or Switches.The multiplexer provides 4 inputs.The system operates with a resistance of 2kOhm.Transmission is carried out over 4 channels in the turn signal switch's circuit.
CD4016BPWR Features
Supplied in the 14-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Dual, Single
CD4016BPWR Applications
There are a lot of Texas Instruments CD4016BPWR Signal Switches / Multiplexers / Decoders applications.
- Memory chips
- Enabling block of memory depending on address in memory chips
- Computer memory
- Electronic circuits
- Medical industry
- Electronics industry
- War field flying robot with a night vision flying camera
- Automatic health monitoring systems
- Logic circuits
- GLAN
