CD40174BM
| Parameters | |
|---|---|
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | CD40174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Channels | 6 |
| Load Capacitance | 50pF |
| Output Current | 6.8mA |
| Number of Bits | 6 |
| Clock Frequency | 16MHz |
| Propagation Delay | 300 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 50 ns |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 6.8mA 6.8mA |
| Max Propagation Delay @ V, Max CL | 100ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| fmax-Min | 8 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Min Supply Voltage (DC) | 3V |
| Max Frequency@Nom-Sup | 3500000Hz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 4000B |
CD40174BM Overview
The package is in the form of 16-SOIC (0.154, 3.90mm Width). D flip flop is included in the Tubepackage. T flip flop uses Non-Invertedas the output. This trigger is configured to use Positive Edge. Surface Mountmounts this electrical part. With a supply voltage of 3V~18V volts, it operates. Currently, the operating temperature is -55°C~125°C TA. It is an electronic flip flop with the type D-Type. In FPGA terms, D flip flop is a type of 4000Bseries FPGA. It should not exceed 16MHzin its output frequency. In total, it contains 1 elements. It consumes 4μA of quiescent A total of 16terminations have been recorded. It is a member of the CD40174 family. Power is supplied from a voltage of 5V volts. A 5pFfarad input capacitance is provided by this T flip flop. There is an electronic part that is mounted in the way of Surface Mount. Basically, it is designed with a set of 16 pins. In this device, the clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. The flip flop is designed with 6bits. With an output current of 6.8mA, it is possible to design the device in any way you want. Quiescent current is consumed by the D latch in the amount of 20μA. A total of 6 channels are available.
CD40174BM Features
Tube package
4000B series
16 pins
6 Bits
CD40174BM Applications
There are a lot of Texas Instruments CD40174BM Flip Flops applications.
- Event Detectors
- Instrumentation
- Clock pulse
- Shift Registers
- Individual Asynchronous Resets
- Frequency Divider circuits
- EMI reduction circuitry
- Data storage
- Cold spare funcion
- Memory
