CD40174BM96
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD40174 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 6 |
| Load Capacitance | 50pF |
| Number of Bits | 6 |
| Clock Frequency | 16MHz |
| Propagation Delay | 300 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 50 ns |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 6.8mA 6.8mA |
| Max Propagation Delay @ V, Max CL | 100ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| fmax-Min | 8 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 3500000Hz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD40174BM96 Overview
The package is in the form of 16-SOIC (0.154, 3.90mm Width). It is contained within the Tape & Reel (TR)package. T flip flop is configured with an output of Non-Inverted. The trigger configured with it uses Positive Edge. This electronic part is mounted in the way of Surface Mount. A voltage of 3V~18Vis required for its operation. The operating temperature is -55°C~125°C TA. It belongs to the type D-Typeof flip flops. The FPGA belongs to the 4000B series. A frequency of 16MHzshould not be exceeded by its output. D latch consists of 1 elements. It consumes 4μA of quiescent current without being affected by external factors. There are 16 terminations,The CD40174family includes it. It is powered from a supply voltage of 5V. There is 5pF input capacitance for this T flip flop. Electronic part Surface Mountis mounted in the way. It is designed with 16 pins. A Positive Edgeclock edge trigger is used in this device. This part is included in FF/Latches. It is designed with 6bits. The supply voltage (Vsup) should be maintained above 3V for normal operation. The superior flexibility of this circuit is achieved by using 6 circuits. A reliable performance of this D flip flop makes it well suited for use in TR. Despite external influences, it consumes 20μAof quiescent current.
CD40174BM96 Features
Tape & Reel (TR) package
4000B series
16 pins
6 Bits
CD40174BM96 Applications
There are a lot of Texas Instruments CD40174BM96 Flip Flops applications.
- Buffered Clock
- Event Detectors
- Reduced system switching noise
- Functionally equivalent to the MC10/100EL29
- ESCC
- Power down protection
- Single Down Count-Control Line
- Bounce elimination switch
- Control circuits
- Common Clocks
