CD40174BMT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | CD40174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 6 |
| Load Capacitance | 50pF |
| Output Current | 6.8mA |
| Number of Bits | 6 |
| Clock Frequency | 16MHz |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 50 ns |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 6.8mA 6.8mA |
| Max Propagation Delay @ V, Max CL | 100ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| fmax-Min | 8 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 3500000Hz |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
CD40174BMT Overview
The package is in the form of 16-SOIC (0.154, 3.90mm Width). Package Tape & Reel (TR)embeds it. T flip flop is configured with an output of Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 3V~18V volts. In the operating environment, the temperature is -55°C~125°C TA. This logic flip flop is classified as type D-Type. It belongs to the 4000Bseries of FPGAs. Its output frequency should not exceed 16MHz. A total of 1 elements are present. It consumes 4μA of quiescent There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. You can search similar parts based on CD40174. A voltage of 5V is used to power it. A JK flip flop with a 5pFfarad input capacitance is used here. This electronic part is mounted in the way of Surface Mount. As you can see from the design, it has pins with 16. Its clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. There are 6bits in this flip flop. It is imperative that the supply voltage (Vsup) is maintained above 3Vin order to ensure normal operation. The superior flexibility is achieved through the use of 6 circuits. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. It offers maximum design flexibility with its output current of 6.8mA.
CD40174BMT Features
Tape & Reel (TR) package
4000B series
16 pins
6 Bits
CD40174BMT Applications
There are a lot of Texas Instruments CD40174BMT Flip Flops applications.
- Memory
- Test & Measurement
- Bus hold
- ATE
- Latch-up performance
- Data storage
- Clock pulse
- Modulo – n – counter
- Asynchronous counter
- Functionally equivalent to the MC10/100EL29
