CD40174BPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD40174 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Output Current | 6.8mA |
| Number of Bits | 6 |
| Clock Frequency | 16MHz |
| Propagation Delay | 300 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 50 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 6.8mA 6.8mA |
| Max Propagation Delay @ V, Max CL | 100ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 6 |
| fmax-Min | 8 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 3500000Hz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD40174BPW Overview
The package is in the form of 16-TSSOP (0.173, 4.40mm Width). It is included in the package Tube. Currently, the output is configured to use Non-Inverted. This trigger is configured to use Positive Edge. This electronic part is mounted in the way of Surface Mount. A voltage of 3V~18Vis required for its operation. In the operating environment, the temperature is -55°C~125°C TA. The type of this D latch is D-Type. In this case, it is a type of FPGA belonging to the 4000B series. It should not exceed 16MHzin terms of its output frequency. The element count is 1 . As a result, it consumes 4μA of quiescent current without being affected by external factors. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The object belongs to the CD40174 family. Power is provided by a 5V supply. There is 5pF input capacitance for this T flip flop. Surface Mount mounts this electronic component. The electronic flip flop is designed with pins 16. Its clock edge trigger type is Positive Edge. This part is included in FF/Latches. 6bits are used in its design. Keeping the supply voltage (Vsup) above 3V is necessary for normal operation. With a current output of 6.8mA , it offers maximum design flexibility. 6input lines are available for you to choose from. There is a consumption of 20μAof quiescent current from it.
CD40174BPW Features
Tube package
4000B series
16 pins
6 Bits
CD40174BPW Applications
There are a lot of Texas Instruments CD40174BPW Flip Flops applications.
- Common Clocks
- Data storage
- Matched Rise and Fall
- Storage Registers
- Shift registers
- Patented noise
- Power down protection
- Registers
- ESD performance
- Memory
