CD40175BM96
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | CD40175 |
| Function | Master Reset |
| Number of Outputs | 8 |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Clock Frequency | 14MHz |
| Propagation Delay | 120 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 70 ns |
| Current - Output High, Low | 6.8mA 6.8mA |
| Max Propagation Delay @ V, Max CL | 120ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Power Supply Current-Max (ICC) | 0.06mA |
| Number of Input Lines | 4 |
| fmax-Min | 6.5 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 2000000Hz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD40175BM96 Overview
In the form of 16-SOIC (0.154, 3.90mm Width), it has been packaged. The Tape & Reel (TR)package contains it. There is a Differentialoutput configured with it. JK flip flop uses Positive Edgeas the trigger. Surface Mountmounts this electrical part. A 3V~18Vsupply voltage is required for it to operate. It is operating at -55°C~125°C TA. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 4000B series. It should not exceed 14MHzin its output frequency. There are 1 elements in it. Terminations are 16. The CD40175 family contains it. The power source is powered by 5V. The input capacitance of this JK flip flopis 5pF farads. Electronic part Surface Mountis mounted in the way. This board is designed with 16pins on it. There is a clock edge trigger type of Positive Edgeon this device. This RS flip flops is a part number FF/Latches. The flip flop is designed with 4bits. Normally, the supply voltage (Vsup) should be kept above 3V. On the basis of its reliable performance, this D flip flop is well suited for use with TR. It has 4lines. It consumes a total of 4μA quiescent current at any given time.
CD40175BM96 Features
Tape & Reel (TR) package
4000B series
16 pins
4 Bits
CD40175BM96 Applications
There are a lot of Texas Instruments CD40175BM96 Flip Flops applications.
- Divide a clock signal by 2 or 4
- Single Down Count-Control Line
- Parallel data storage
- Memory
- Instrumentation
- Differential Individual
- Frequency Divider circuits
- Individual Asynchronous Resets
- Consumer
- Latch-up performance
