CD40175BMT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD40175 |
| Function | Master Reset |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Output Current | 6.8mA |
| Number of Bits | 4 |
| Clock Frequency | 14MHz |
| Propagation Delay | 400 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 70 ns |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 6.8mA 6.8mA |
| Max Propagation Delay @ V, Max CL | 120ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Power Supply Current-Max (ICC) | 0.06mA |
| Number of Input Lines | 4 |
| fmax-Min | 6.5 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 2000000Hz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD40175BMT Overview
In the form of 16-SOIC (0.154, 3.90mm Width), it has been packaged. As part of the package Tape & Reel (TR), it is embedded. The output it is configured with uses Differential. This trigger is configured to use Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 3V~18V. Temperature is set to -55°C~125°C TA. This logic flip flop is classified as type D-Type. It is a type of FPGA belonging to the 4000B series. A frequency of 14MHzshould not be exceeded by its output. The list contains 1 elements. There is 4μA quiescent consumption. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. It is a member of the CD40175 family. A voltage of 5V is used to power it. There is 5pF input capacitance for this T flip flop. The electronic part is mounted in the way of Surface Mount. This board has 16 pins. The clock edge trigger type for this device is Positive Edge. This part is included in FF/Latches. Flip flops designed with 4bits are used in this part. The supply voltage (Vsup) should be kept above 3V for normal operation. Considering the reliability of this T flip flop, it is well suited for TR. It offers maximum design flexibility with its output current of 6.8mA. 4input lines are available for you to choose from. There is a consumption of 20μAof quiescent current from it.
CD40175BMT Features
Tape & Reel (TR) package
4000B series
16 pins
4 Bits
CD40175BMT Applications
There are a lot of Texas Instruments CD40175BMT Flip Flops applications.
- Memory
- Safety Clamp
- Frequency Divider circuits
- Instrumentation
- Automotive
- Data transfer
- Differential Individual
- Synchronous counter
- Bus hold
- Test & Measurement
