CD40175BNSRE4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 14MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Load Capacitance | 50pF |
| Propagation Delay | 400 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 70 ns |
| Logic Function | D-Type |
| Logic IC Type | D FLIP-FLOP |
| Number of Bits per Element | 4 |
| High Level Output Current | -4.2mA |
| Low Level Output Current | 1.5mA |
| fmax-Min | 6.5 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD40175BNSRE4 Overview
The item is packaged in SOPcases. Package Tape & Reel (TR)embeds it. In total, it contains 1 elements. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The D flip flop is powered by a voltage of 5V . A part of the electronic system is mounted in the way of Surface Mount. As you can see from the design, it has pins with 16. This device has Positive Edgeas its clock edge trigger type. There is a base part number FF/Latchesfor the RS flip flops. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. 20μAquiescent current consumed. In this case, the high level output current is set to -4.2mA. 1.5mAis set as the low level output current. A temperature below 125°Cshould be used for operation. A temperature above -55°Cshould be used for the operation. It operates with the minimal supply voltage of 3V. It supports the maximal supply voltage of 18V. This frequency can be achieved at 14MHz. The logic IC it adopts is D FLIP-FLOP. It is equipped with 1 Functions . The JK flip flop has a pin count of 16.
CD40175BNSRE4 Features
Tape & Reel (TR) package
16 pins
1 Functions
16 pin count
CD40175BNSRE4 Applications
There are a lot of Texas Instruments CD40175BNSRE4 Flip Flops applications.
- Clock pulse
- Data storage
- 2 – Bit synchronous counter
- EMI reduction circuitry
- Latch-up performance
- Common Clocks
- Supports Live Insertion
- Individual Asynchronous Resets
- Set-reset capability
- Frequency division
