CD40175BPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | CD40175 |
| Function | Master Reset |
| Number of Outputs | 8 |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Clock Frequency | 14MHz |
| Propagation Delay | 400 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 70 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 6.8mA 6.8mA |
| Max Propagation Delay @ V, Max CL | 120ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Power Supply Current-Max (ICC) | 0.06mA |
| fmax-Min | 6.5 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 2000000Hz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD40175BPWR Overview
16-TSSOP (0.173, 4.40mm Width)is the packaging method. D flip flop is included in the Cut Tape (CT)package. T flip flop is configured with an output of Differential. It is configured with a trigger that uses a value of Positive Edge. Surface Mountmounts this electrical part. Powered by a 3V~18Vvolt supply, it operates as follows. Currently, the operating temperature is -55°C~125°C TA. This logic flip flop is classified as type D-Type. The 4000Bseries comprises this type of FPGA. You should not exceed 14MHzin the output frequency of the device. There are 1 elements in it. There is a consumption of 4μAof quiescent energy. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. JK flip flop belongs to CD40175 family. It is powered by a voltage of 5V . JK flip flop input capacitance is 5pF farads. Electronic part Surface Mountis mounted in the way. This board has 16 pins. This device's clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. The flip flop is designed with 4bits. A normal operating voltage (Vsup) should remain above 3V. Using 4 circuits, it is highly flexible. On the basis of its reliable performance, this D flip flop is well suited for use with TR. It consumes a total of 20μA quiescent current at any given time.
CD40175BPWR Features
Cut Tape (CT) package
4000B series
16 pins
4 Bits
CD40175BPWR Applications
There are a lot of Texas Instruments CD40175BPWR Flip Flops applications.
- ESCC
- CMOS Process
- Differential Individual
- Automotive
- Memory
- Parallel data storage
- Digital electronics systems
- Data storage
- Bounce elimination switch
- ESD protection
